-- *****************************************************************
-- Cisco Class-Based QoS Configuration and Statistics MIB
--
-- Copyright (c) 2000-2004, 2007 by Cisco Systems, Inc.
--
-- All rights reserved.
--
-- ***************************************************************CISCO-CLASS-BASED-QOS-MIB DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,OBJECT-TYPE,Integer32,Counter32,Gauge32,Unsigned32,Counter64FROM SNMPv2-SMI
MODULE-COMPLIANCE,OBJECT-GROUPFROM SNMPv2-CONF
TEXTUAL-CONVENTION,DisplayString,TruthValueFROM SNMPv2-TC
ifIndex,InterfaceIndexFROM IF-MIB
VlanIndexFROM Q-BRIDGE-MIB
Unsigned64,
EntPhysicalIndexOrZero
FROM CISCO-TC
DlciNumber
FROM CISCO-FRAME-RELAY-MIB
ciscoMgmt
FROM CISCO-SMI;ciscoCBQosMIB MODULE-IDENTITYLAST-UPDATED"200710090000Z"ORGANIZATION"Cisco Systems, Inc."CONTACT-INFO"Cisco Systems
Customer Service
Postal: 170 W. Tasman Drive
San Jose, CA 95134-1706
USA
Tel: +1 800 553-NETS
E-mail: cs-qos@cisco.com"DESCRIPTION"Cisco Class-Based QoS MIB
**********************************
Overview
**********************************
This MIB provides read access to Quality of Service (QoS)
configuration and statistics information for Cisco
platforms that support the Modular Quality of Service
Command-line Interface (Modular QoS CLI). We recommend
users of this MIB to review the user documentation of
MQC based QoS features.
Configuration information available through this MIB includes
all ClassMap, PolicyMap, Match Statements, and Feature
Actions configuration parameters. The definitions of each
objects mentioned above are explained in the QoS objects
section.
Statistics available through this MIB include summary
counts/rates by traffic class before and after any configured
QoS policies are enforced. In addition, detailed
feature-specific statistics are available for select
PolicyMap features.
Contact your Cisco representative to determine on which
platforms the MIB is currently supported.
**********************************
QoS Acronyms
**********************************
BECN: Frame Relay Backward Explicit Congestion Notification
CIR : Committed Information Rate
DSCP: Differentiated Service Code Point
EB : Estimate Bandwidth
ECN : Explicite Congestion Notification
FECN: Frame Relay Forward Explicit Congestion Notification
IPHC: Internet Protocol Header Compression
IPSLAs: IP Service Level Agreement Technologies
PIR : Peak Information Rate
PREC: Precedence
QoS : Quality Of Services
RED : Random Early Detect
SRP : Spatial Reuse Protocol
WRED: Weighted Random Early Detect
**********************************
MIB Objects
**********************************
This MIB consists of the following object groups:
1 : cbQosServicePolicy
2 : cbQosInterfacePolicy
3 : cbQosFrameRelayVCPolicy
4 : cbQosATMPVCPolicy
5 : cbQosObjects
6 : cbQosPolicyMapCfg
7 : cbQosClassMapCfg
8 : cbQosMatchStmtCfg
9 : cbQosQueueingCfg
10: cbQosREDCfg
11: cbQosREDClassCfg
12: cbQosPoliceCfg
13: cbQosTSCfg
14: cbQosSetCfg
15: cbQosClassMapStats
16: cbQosMatchStmtStats
17: cbQosPoliceStats
18: cbQosQueueingStats
19: cbQosTSStats
20: cbQosREDClassStats
21: cbQosPoliceActionCfg
22: cbQosIPHCCfg
23: cbQosIPHCStats
24: cbQosSetStats
25: cbQosPoliceColorStats
26: cbQosTableMapCfg
27: cbQosTableMapValueCfg
28: cbQosTableMapSetCfg
29: cbQosEBCfg
30: cbQosEBStats
31: cbQosMeasureIPSLACfg
**********************************
Definitions
**********************************
A logical interface in the context of this MIB is either
a main-interface, a sub-interface, a Frame Relay DLCI,
an ATM virtual circuit or the control-plane on the router.
The (aggregate) control-plane on the router is defined as
a collection of processes running at process level on the
platform (route) processor. This includes the functions
related to networking control capabilities such as routing,
signaling, provisioning, as well as resource and service
discovery. Also includes process switched traffic on the
device.
The term distributed control plane, in the context of
this mib, represents the control-plane functionality at
the level of individual linecards. This is only
applicable for the case of distributed platforms.
**********************************
QoS Objects
**********************************
To understand Class-Based QoS features and how to navigate
the MIB tables above, the key element is to comprehend the
relationships among the different QoS objects. QoS objects
consist of ClassMaps, Match Statements and PolicyMaps,
and each Feature Actions.
Match Statement - The specific match criteria to identify
packets for classification purposes.
ClassMap - A user-defined traffic class that contains
one or many match statements used to classify packets into
different categories.
Feature Action - An action is a QoS feature. Features
include police, traffic-shaping, queueing, random detect
and packet marking(set). After the traffic is being
classified, based on the traffic classification, we can
apply these action to each traffic class.
PolicyMap - A user-defined policy that associates each QoS
action to the user-defined traffic class (ClassMap).
Service Policy - Service policy is a policymap
that is being attached to a logical interface. Because a
policymap can also be a part of the hierarchical structure
(inside a classmap), only a policymap that is directly
attached to a logical interface is considered a service
policy. Each service policy is uniquely identified by an
index called cbQosPolicyIndex. This number is usually
identical to its cbQosObjectsIndex as a policymap.
*****************************************
Runtime Instance vs Configuration objects
*****************************************
Each QoS objects have 2 sets of behaviours :
1: A configuration instance
- Each QoS objects has it's configuration portion of
information attached to it. This information does
not change whether this object is attached on multiple
logical interfaces and used multiple times. We
uniquely identify each QoS object with identical
configuration with the same index - cbQosConfigIndex.
This index is used in all configuration related
tables.
2: A runtime instance
- Each QoS objects has it's statistical portion of
information attached to it. This information changes
when this object is attached on multiple logical
interfaces and used in various different places. We
uniquely identify each QoS runtime object instance
with an index that is unique across multiple
instances of the identical object - cbQosObjectsIndex.
This index is used in all statistical related tables.
In summary, a QoS object has 2 indexes associated with it:
cbQosConfigIndex is used to identify it's configuration,
which does not change regardless of number of times and
where it is being used; and cbQosObjectsIndex is used
to identify it's runtime statistics, depending on which
logical interface and where in a given PolicyMap hierarchy
this object is used, it may have multiple unique
identifiers to distinguish each unique usage (instance) of
the same object.
**********************************
Navigation
**********************************
The recommended method of navigating through all of the MIB
tables is to start by learning the cbQosServicePolicyTable
and cbQosObjectsTable MIB tables. In particular, Cisco
Systems recommends understanding the cbQosObjectsIndex and
cbQosParentObjectsIndex of each QoS feature.
The cbQosPolicyIndex and cbQosObjectsIndex are
system-assigned numbers that identify each unique instance
of a QoS feature. These indexes are never reused between
router reboots, even when changes are made to the QoS
configuration. The cbQosPolicyIndex is designed to identify
the service policies attached to logical interfaces, while
the cbQosObjectsIndex is designed to identify each QoS
feature on a specified device.
The cbQosParentObjectsIndex is designed to show the
hierarchical relationship of each QoS feature.
**********************************
cbQosServicePolicyTable
**********************************
Accessing cbQosServicePolicyTable requires
cbQosPolicyIndex. This index is a system-assigned number
to uniquely identify each service policy hanging off of
each logical interface. Given cbQosPolicyIndex the tables
provide the type of logical interface/media type on which
this policy is applied, the direction in which this policy
is enforced, and the SNMP interface index and/or the entity
index of the underlying interface/entity. In the case of a
policy being applied on a Frame Relay DLCI, the cbQosFrDLCI
gives you the Frame Relay DLCI number to which this policy
is attached. In the case of policy being attached to an ATM
VC, cbQosAtmVPI and cbQosAtmVCI display the VPI and VCI of
the ATM interface respectively.
**********************************
cbQosObjectsTable
**********************************
Accessing cbQosObjectsTable requires two indexes,
cbQosPolicyIndex and cbQosObjectsIndex.
Given a particular service policy on a given logical
interface, there could be PolicyMaps, ClassMaps, Match
Statements and Feature Actions being used. Each instance
of these objects is uniquely identified by
cbQosObjectsIndex.
Users need to decide which QoS object is interesting
and use the cbQosPolicyIndex and cbQosObjectsIndex to
locate the right element of interest. This tables provides
cbQosObjectsType, cbQosConfigIndex, and
cbQosParentObjectsIndex.
To understand the relationship of cbQosObjectsIndex,
cbQosParentObjectsIndex and the hierarchical relationship
of the QoS objects, consider the following QoS
configuration example:
Interface ethernet 0/1
Input Service Policy cntlWebTraffic
ClassMap http
match ip http
set ip precedence 5
Output Service Policy cntlSNMP_Telnet
ClassMap snmp
match ip snmp
shape average 8000 32 32
ClassMap Telnet
match ip telnet
shape average 10000 32 32
Interface ethernet 0/2
Input Service Policy cntlWebTraffic
ClassMap http
match ip http
set ip precedence 5
Output Service Policy cntlSNMP_Telnet
ClassMap snmp
match ip snmp
shape average 8000 32 32
ClassMap Telnet
match ip telnet
shape average 10000 32 32
*** In Ethernet 0/1 ***
Assume the router assigned a cbQosConfigIndex=1024 and
cbQosObjectsIndex=1084 to Policy cntlWebTraffic.
Because it is attached to an interface, it has no parent
QoS object, and thus cbQosParentObjectsIndex=0.
In addition, because cntlWebTraffic is also the service
policy of the interface, it has a unique cbQosPolicyIndex
assigned to it. In most cases, it would be the same as
the cbQosObjectsIndex, which is 1084 in this case.
Therefore, the indexes are:
cbQosPolicyIndex = 1084
cbQosObjectsIndex = 1084
cbQosConfigIndex = 1024
Assuming the router assigned a cbQosObjectsIndex=1085
and cbQosConfigIndex=1025 to ClassMap http, it is
directly being used by Policy cntlWebTraffic, and therefore
the cbQosParentObjectsIndex of ClassMap http will be 1084.
Assuming the router assigned a cbQosConfigIndex=1026 and
cbQosObjectsIndex=1086 to match ip http, it is directly
used by ClassMap http, therefore the
cbQosParentObjectsIndex of match ip http will be 1085.
Assuming the router assigned a cbQosConfigIndex=1027 and
cbQosObjectsIndex=1087 to set ip precedence 5, it is
directly used by ClassMap http, therefore the
cbQosParentObjectsIndex of match ip http will be 1085.
Assuming the router assigned a cbQosConfigIndex=1028 and
cbQosObjectsIndex=1088 to Policy cntlSNMP_Telnet.
Because it is attached to an interface, it has no parent
QoS object, and thus cbQosParentObjectsIndex=0.
In addition, because cntlSNMP_Telnet is also the service
policy of the interface, it has a unique cbQosPolicyIndex
assigned to it. In most cases, it would be the same as
the cbQosObjectsIndex, which is 1088 in this case.
Assuming the router assigned a cbQosConfigIndex=1029 and
cbQosObjectsIndex=1089 to ClassMap snmp, it is
directly being used by Policy cntlSNMP_Telnet, and
therefore the cbQosParentObjectsIndex of ClassMap snmp
will be 1088.
Assuming the router assigned a cbQosConfigIndex=1030 and
cbQosObjectsIndex=1090 to match ip snmp, it is directly
used by ClassMap snmp, and therefore the
cbQosParentObjectsIndex of match ip snmp will be 1089.
Assuming the router assigned a cbQosConfigIndex=1031 and
cbQosObjectsIndex=1091 to shape average 8000 32 32,
it is directly used by ClassMap snmp, therefore the
cbQosParentObjectsIndex of match ip snmp will be 1089.
Assuming the router assigned a cbQosConfigIndex=1032 and
cbQosObjectsIndex=1092 to ClassMap Telnet, it is
directly being used by Policy cntlSNMP_Telnet, and
therefore the cbQosParentObjectsIndex of
ClassMap Telnet will be 1088.
Assuming the router assigned a cbQosConfigIndex=1033 and
cbQosObjectsIndex=1093 to match ip telnet, it is
directly used by ClassMap Telnet, and therefore the
cbQosParentObjectsIndex of match ip telnet will be 1092.
Assuming the router assigned a cbQosConfigIndex=1034 and
cbQosObjectsIndex=1094 to shape 10000 32 32, it is
directly used by ClassMap telnet, therefore the
cbQosParentObjectsIndex of match ip telnet will be 1092.
*** In Ethernet 0/2 ***
Every objects will have a new and unique cbQosPolicyIndex
and cbQosObjectsIndex, but cbQosConfigIndex will be
shared across the same objects that are applied in
different places.
**********************************
All Config Tables
**********************************
Accessing config related tables requires the same index
- cbQosConfigIndex. (Per precedence based tables requires
a second index, which is IP precedence value) Users
should have already gone through the cbQosObjectsTable
at this point and understood each cbQosConfigIndex and the
corresponding QoS objects. Users can uniquely identify
each QoS object defined on the router and query the
entries in each stats table on a per QoS object basis.
**********************************
All Stats Tables
**********************************
Accessing all stats related tables requires the same
2 indexes. They are cbQosPolicyIndex and cbQosObjectsIndex.
(Per precedence based tables requires a third index, which
is IP precedence value) Users should have already gone
through the cbQosObjectsTable at this point and understood
the relationship of each cbQosPolicyIndex and
cbQosObjectsIndex pair and the corresponding QoS objects.
Users can uniquely identify each QoS object defined on the
router and query the entries in each stats table on a per
QoS object basis."REVISION"200710090000Z"DESCRIPTION"1. Added cbQosTSCfgRate64 to cbQosTSCfgTable
to support shaping rates greater than that fit in
the range defined for cbQosTSCfgRate.
2. Created cbQosTSCfgExtGroup.
3. Created new compliance module ciscocbQosMIBComplianceRev5
which deprecates ciscocbQosMIBComplianceRev4."REVISION"200708300000Z"DESCRIPTION"Added 'setL2CosInner' value to PoliceAction TC."REVISION"200707100000Z"DESCRIPTION"Added following enumerations to RedMechanism TC:
mplsExp
redDefault
redUserDefault"REVISION"200409200000Z"DESCRIPTION"1. Added vlan-port as a new InterfaceType.
2. Created cbQosServicePolicyExtGroup."REVISION"200404120000Z"DESCRIPTION"Added support for Estimate Bandwidth and its Corvil
implementation. Corvil's algorithm generates the
estimated bandwidth for a class of traffic from
knowledge of the QoS targets such as delay and drop,
and the observed traffic behavior."REVISION"200307240000Z"DESCRIPTION"Added setIpDscpTunnel, setIpPrecedenceTunnel
to the PoliceAction TC.
Added srpPriority, frFecnBecn, ipDscpTunnel,
ipPrecedenceTunnel to the SetFeatureType TC.
Added l2Cos, atmClp to the REDMechanism TC.
Added cps to the CbQosRateType TC.
Added CbQosTMSetType TC.
Added cbQosQueueingCfgAggrQLimitTime
to the cbQosQueueingCfgTable.
Added cbQosREDClassCfgMinThresholdTime,
cbQosREDClassCfgMaxThresholdTime
to the cbQosREDClassCfgTable.
Added cbQosPoliceCfgCellRate,
cbQosPoliceCfgCellPir,
cbQosPoliceCfgBurstCell,
cbQosPoliceCfgExtBurstCell,
cbQosPoliceCfgBurstTime,
cbQosPoliceCfgExtBurstTime,
cbQosPoliceCfgCdvt,
cbQosPoliceCfgConformColor,
cbQosPoliceCfgExceedColor
to the cbQosPoliceCfgTable.
Added cbQosTSCfgBurstTime, cbQosTSCfgExtBurstTime
to the cbQosTSCfgTable.
Added cbQosSetCfgSrpPriority, cbQosSetCfgFrFecnBecn
to the cbQosSetCfgTable.
Added cbQosSetStatsTable.
Added cbQosPoliceColorStatsTable.
Added cbQosTableMapCfgTable.
Added cbQosTableMapValueCfgTable.
Added cbQosTableMapSetCfgTable."REVISION"200306090000Z"DESCRIPTION"Added controlPlane to the InterfaceType TC.
Added cbQosEntityIndex to the cbQosServicePolicyTable."REVISION"200301210000Z"DESCRIPTION"Added compression(9) in QosObjectType TC for IPHC;
Added setMplsExpTopMost(11) in PoliceAction TC for
POLICE;
Added mplsExpTopMost(8) in SetFeatureType TC for SET;
Added discardClass(13) in REDMechanism TC for WRED;
Added CbQosRateType TC for POLICE and SHAPE;
Added IPHCOption TC for IPHC;
Added cbQosPoliceCfgRateType,
cbQosPoliceCfgPercentRateValue,
cbQosPoliceCfgPercentPirValue for POLICE;
Added cbQosTSCfgRateType,
cbQosTSCfgPercentRateValue for SHAPE;
Added cbQosSetCfgMplsExpTopMostValue for SET;
Added cbQosIPHCCfg and cbQosIPHCStats tables for IPHC."REVISION"200212030000Z"DESCRIPTION"Added new cbQosPoliceCfgRate64 to cbQosPoliceCfgEntry
table to support policing rates greater than fit in
the range defined for cbQosPoliceCfgRate"REVISION"200207240000Z"DESCRIPTION"Added support for ECN; Pir policing; multiple
police actions; added MPLS-EXP/ATM-CLP/DR-DE/
L2Cos/DiscardClass marking in police action;
added MPLS-EXP and DiscardClass marking;
modified ATM-CLP and FR-DE marking.
Added objects to handle queue depth unit type and
queue depth pair related objects (e.g.,
cbQosQueueingCfgQLimitUnits and
cbQosQueueingCfgAggregateQLimit pair) to support
queue depth in different units."REVISION"200103140000Z"DESCRIPTION"Added support for FR DE, ATM CLP and L2 marking.
Added Bandwidth remaining percent option"REVISION"200012080000Z"DESCRIPTION"Added support for Police Violate counters and
DSCP WRED counters"REVISION"200007130000Z"DESCRIPTION"Initial version of Class-based QoS configuration and
statistical parameters MIB"::={ ciscoMgmt 166}-- Textual ConventionsQosObjectType ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"Enums to indicate different QoS objects .
policymap - The object in query is a PolicyMap, being
attached on a logical interface.
classmap - The object in query is a ClassMap, being
used by it's parent PolicyMap.
matchStatement - The object in query is a Match Statement,
being used by it's parent ClassMap.
queueing - The object in query is a queueing feature being
applied on the parent ClassMap.
randomDetect - The object in query is a Random Detect feature
being applied on the parent ClassMap.
trafficShaping - The object in query is a traffic-shaping
feature being applied on the parent ClassMap.
police - The object in query is a Police feature being
applied on the parent ClassMap.
set - The object in query is a Packet Marking
feature being applied on the parent ClassMap.
compression - The object in query is a IP header compression
feature being applied on the parent ClassMap.
ipslaMeasure - The object in query is Measure IPSLAs feature
being applied on the parent ClassMap."SYNTAXINTEGER{policymap(1),classmap(2),matchStatement(3),queueing(4),randomDetect(5),trafficShaping(6),police(7),set(8),compression(9),ipslaMeasure(10)}TrafficDirection ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"Enums to indicate whether the Policymap is for
Input or Output direction."SYNTAXINTEGER{input(1),output(2)}QosClassInfo ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"Enums to indicate whether the Classmap is for
Match All or Match Any."SYNTAXINTEGER{none(1),matchAll(2),matchAny(3)}QosMatchInfo ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"Enums to indicate whether the MatchStatement is matching
on negated criteria (Match Not)."SYNTAXINTEGER{
none(1),matchNot(2)}InterfaceType ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"Enums to indicate the type of logical interface to which
a particular service policy is attached.
Main Interface - Service policy is attached on the main
interface.
Sub Interface - Service policy is attached on the sub
interface.
Frame Relay DLCI - Service policy is attached on the a
Frame Relay DLCI.
ATM VC - Service policy is attached on the an ATM
Virtual Circuit.
Control Plane - Service policy is attached to the control
plane of the device.
Vlan Port - Service policy is attached to a particular
vlan of a layer 2 interface that can carry
traffic on multiple vlans."SYNTAXINTEGER{mainInterface(1),subInterface(2),frDLCI(3),atmPVC(4),controlPlane(5),vlanPort(6)}QueueingBandwidthUnits ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"The units of the bandwidth, used to allocate
bandwidth. Bandwidth can be either an absolute kbps
number, or be expressed as a percentage of the
available bandwidth.
kbps Kilo bits Per Second
percentage %"SYNTAXINTEGER{kbps(1),percentage(2),percentageRemaining(3)}TrafficShapingLimit ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"The limit used by the traffic-shaping feature.
This value may be 'average' or 'peak',
which indicates whether it is shaping by average
rate or peak rate."SYNTAXINTEGER{average(1),peak(2)}PoliceAction ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"The available actions taken on packets upon
conforming, exceeding or violating the configured
police rate.
Transmit - Transmit the packet if the packet conforms
or exceeds the configured police rate.
Set IP DSCP - Set the IP DSCP value if the packet
conforms or exceeds the configured police
rate.
Set IP Precedence - Set the IP precedence value if
the packet conforms or exceeds
the configured police rate.
Set Qos Group - Set the QoS Group value if
the packet conforms or exceeds
the configured police rate.
Set MPLS Exp - Set the MPLS Experimental Imposition
vaule for the applicable action.
Set ATM CLP - Set the ATM CLP bit for the
applicable action.
Set FR DE - Set the FR DE bit for the
applicable action.
Set L2 COS - Set the 802.1p priority field in 802.1Q
VLAN tag for the applicable action.
Set Discard Class - Set the Discard Class value for the
applicable action.
Drop - Drop the packet if the packet conforms or
exceeds the configured police rate.
Set MPLS Exp TopMost - Set the MPLS Experimental
TopMost vaule for the applicable action.
Set IP DSCP Tunnel - Set the IP DSCP Tunnel
value for the applicable action.
Set IP Precedence Tunnel - Set the IP Precedence
Tunnel value for the applicable action.
Set Inner L2 COS - Set the 802.1p priority field in inner
802.1q VLAN tag (QinQ) for the applicable
action."SYNTAXINTEGER{transmit(1),setIpDSCP(2),setIpPrecedence(3),setQosGroup(4),drop(5),setMplsExp(6),setAtmClp(7),setFrDe(8),setL2Cos(9),setDiscardClass(10),setMplsExpTopMost(11),setIpDscpTunnel(12),setIpPrecedenceTunnel(13),setL2CosInner(14)-- QinQ inner L2 CoS}SetFeatureType ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"Bit-wise representation of packet marking feature available
today. For historical reason, both packet marking and SET
terms have been used across Cisco Class-Based QOS, but they
have the same meaning. This feature is used to mark/set
appropriate fields(e.g, dscp, precedence, mpls-experimental
-topmost) for applicable packets."SYNTAXBITS{ipDscp(0),ipPrecedence(1),qosGroupNumber(2),frDeBit(3),atmClpBit(4),l2Cos(5),mplsExp(6),discardClass(7),mplsExpTopMost(8),srpPriority(9),frFecnBecn(10),ipDscpTunnel(11),ipPrecedenceTunnel(12)}REDMechanism ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"This denotes which mechanism is used with RED.
precedence Based on IP precedence
dscp Based on DSCP values
discardClass Based on discard class
l2Cos Based on L2-COS class
atmClp Based on ATM-CLP class
mplsExp Based on MPLS Experimental values
redDefault Default RED profile
redUserDefault User specified Default RED profile"SYNTAXINTEGER{
precedence(1),dscp(2),discardClass(3),l2Cos(4),atmClp(5),mplsExp(6),redDefault(7),redUserDefault(8)}CbQosQueueUnitType ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"A value that represents an unit type of queue
size.
packets(1) Represents the UNITS of 'packets' for
queue size.
cells(2) Represents the UNITS of 'cells' for
queue size.
bytes(3) Represents the UNITS of 'bytes' for
queue size.
ms(4) Represents the UNITS of 'milli-seconds' for
queue size
us(5) Represents the UNITS of 'micro-seconds' for
queue size
To support future extensions, the CbQosQueueUnitType
textual convention SHOULD NOT be sub-typed in object
type definitions.
It MAY be sub-typed in compliance statements in order to
require only a subset of these queue size types for a
compliant implementation.
Implementations must ensure that CbQosQueueUnitType
objects and any dependent object (e.g. CbQosQueueDepth)
are consistent. An inconsistentValue error must be
generated if an attempt to change an CbQosQueueUnitType
object would lead to an undefined CbQosQueueDepth value.
In particular, CbQoSQueueUnitType/CbQosQueueDepth pairs
must be changed together if the CbQosQueueUnitType
type changes (e.g. from packets(1) to cells(2))."SYNTAXINTEGER{packets(1),cells(2),bytes(3),ms(4),us(5)}CbQosQueueDepth ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"Denotes a generic Queue depth value.
An CbQoSQueueDepth value is always interpreted within
the context of an CbQosQueueUnitType value. Every usage
of the CbQosQueueDepth textual convention is required to
specify the CbQosQueueUnitType object which provides
the context. It is suggested that the
CbQoSQueueUnitType object is logically registered
before the object(s) which use the CbQosQueueDepth
textual convention if they appear in the same logical
row. The value of an CbQosQueueDepth object must always
be consistent with the value of the associated
CbQosQueueUnitType object. Attempts to set an
CbQosQueueDepth object to a value which is inconsistent
with the associated CbQosQueueUnitType must fail with
an inconsistentValue error."SYNTAXUnsigned32CbQosRateType ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"The type of rate. Rate type can be either an
absolute bps number, or be expressed as a percentage
of the available interface bandwidth, or an absolute
cps number.
bps Bits Per Second
percentage %
cps Cells Per Second"SYNTAXINTEGER{bps(1),percentage(2),cps(3)}
IPHCOption ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"Enums to indicate the type of IP header compression.
rtp(1) UDP/RTP compression.
tcp(2) TCP compression.
bothRtpTcp(3) Both UDP/RTP and TCP compression."SYNTAXINTEGER{rtp(1),tcp(2),bothRtpTcp(3)}CbQosTMSetType ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"The available packet marking types which can use
tablemap to establish to-from relationship for
enhanced packeting marking."SYNTAXINTEGER{none(0),ipDscp(1),ipPrecedence(2),qosGroup(3),l2Cos(4),mplsExpImp(5),mplsExpTop(6)}CbQosEBType ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"A value that indicates the type of bandwidth
estimate algorithm.
typeNone no algorithm is selected
typeCorvil algorithm based on Corvil
bandwidth calculation."SYNTAXINTEGER{typeNone(0),typeCorvil(1)}CbQosEBCtd ::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"A CTD (Corvil Traffic Descriptor) specific value."SYNTAXOCTETSTRING-- Overview of MIB Objects:
--
-- Defines 2 groups of objects.ciscoCBQosMIBObjects OBJECTIDENTIFIER::={ ciscoCBQosMIB 1}ciscocbQosMIBConformance OBJECTIDENTIFIER::={ ciscoCBQosMIB 2}-- object groupscbQosServicePolicy OBJECTIDENTIFIER::={ ciscoCBQosMIBObjects 1}cbQosInterfacePolicy OBJECTIDENTIFIER::={ ciscoCBQosMIBObjects 2}cbQosFrameRelayVCPolicy OBJECTIDENTIFIER::={ ciscoCBQosMIBObjects 3}cbQosATMPVCPolicy OBJECTIDENTIFIER::={ ciscoCBQosMIBObjects 4}cbQosObjects OBJECTIDENTIFIER::={ ciscoCBQosMIBObjects 5}cbQosPolicyMapCfg OBJECTIDENTIFIER::={ ciscoCBQosMIBObjects 6}cbQosClassMapCfg OBJECTIDENTIFIER
::={ ciscoCBQosMIBObjects 7}cbQosMatchStmtCfg OBJECTIDENTIFIER::={ ciscoCBQosMIBObjects 8}cbQosQueueingCfg OBJECTIDENTIFIER::={ ciscoCBQosMIBObjects 9}cbQosREDCfg OBJECTIDENTIFIER::={ ciscoCBQosMIBObjects 10}cbQosREDClassCfg OBJECTIDENTIFIER::={ ciscoCBQosMIBObjects 11}cbQosPoliceCfg OBJECTIDENTIFIER::={ ciscoCBQosMIBObjects 12}cbQosTSCfg OBJECTIDENTIFIER::={ ciscoCBQosMIBObjects 13}cbQosSetCfg OBJECTIDENTIFIER::={ ciscoCBQosMIBObjects 14}cbQosClassMapStats OBJECTIDENTIFIER::={ ciscoCBQosMIBObjects 15}cbQosMatchStmtStats OBJECTIDENTIFIER::={ ciscoCBQosMIBObjects 16}cbQosPoliceStats OBJECTIDENTIFIER::={ ciscoCBQosMIBObjects 17}cbQosQueueingStats OBJECTIDENTIFIER::={ ciscoCBQosMIBObjects 18}cbQosTSStats OBJECTIDENTIFIER::={ ciscoCBQosMIBObjects 19}cbQosREDClassStats OBJECTIDENTIFIER::={ ciscoCBQosMIBObjects 20}cbQosPoliceActionCfg OBJECTIDENTIFIER::={ ciscoCBQosMIBObjects 21}cbQosIPHCCfg OBJECTIDENTIFIER::={ ciscoCBQosMIBObjects 22}cbQosIPHCStats OBJECTIDENTIFIER::={ ciscoCBQosMIBObjects 23}cbQosSetStats OBJECTIDENTIFIER::={ ciscoCBQosMIBObjects 24}cbQosPoliceColorStats OBJECTIDENTIFIER::={ ciscoCBQosMIBObjects 25}cbQosTableMapCfg OBJECTIDENTIFIER::={ ciscoCBQosMIBObjects 26}cbQosTableMapValueCfg OBJECTIDENTIFIER::={ ciscoCBQosMIBObjects 27}cbQosTableMapSetCfg OBJECTIDENTIFIER::={ ciscoCBQosMIBObjects 28}cbQosEBCfg OBJECTIDENTIFIER::={ ciscoCBQosMIBObjects 29}cbQosEBStats OBJECTIDENTIFIER::={ ciscoCBQosMIBObjects 30}cbQosMeasureIPSLACfg OBJECTIDENTIFIER::={ ciscoCBQosMIBObjects 31}
cbQosMeasureIPSLACfgTable OBJECT-TYPESYNTAXSEQUENCEOF CbQosMeasureIPSLACfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table specifies configuration information for measure type
IPSLA action. The measure action relates the policy class to a
specific IPSLAs auto group. Configuration of measure action of
type IPSLA results in automatic generation of IPSLAs synthetic
test operations when the policy is attached to interface. The
operations are created according to the characteristics
specified and to the destinations specified in IPSLA auto group.
The IPSLAs sythentic test operations measure network statistics
such as latency, packet loss and jitter.
This table is to be used only for retrieving the measure
action configuration information."::={ cbQosMeasureIPSLACfg 1}cbQosMeasureIPSLACfgEntry OBJECT-TYPESYNTAX CbQosMeasureIPSLACfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry describes configuration information about
one instance of IPSLAs measure action in the policy map.
The table is indexed by the cbQosConfigIndex and
cbQosMeasureIPSLACfgGroupIndex."INDEX{
cbQosConfigIndex,
cbQosMeasureIPSLACfgGroupIndex
}::={ cbQosMeasureIPSLACfgTable 1}
CbQosMeasureIPSLACfgEntry ::=SEQUENCE{
cbQosMeasureIPSLACfgGroupIndex Unsigned32,
cbQosMeasureIPSLACfgGroupName DisplayString}cbQosMeasureIPSLACfgGroupIndex OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"An arbitrary (system-assigned) index for each
instance of IPSLAs measure action. The index is unique
for each instance for a particular class in particular
policy-map. For example consider following configuration:
policy-map p1
class c1
measure type ip-sla group g1
measure type ip-sla group g2
class c2
measure type ip-sla group g3
In this case the cbQosMeasureIPSLACfgGroupIndex value
for first measure action instance under class c1 will be 1,
for second instance it will be 1, and so on. The value
for the index will start over again from 1 for class c2."::={ cbQosMeasureIPSLACfgEntry 1}cbQosMeasureIPSLACfgGroupName OBJECT-TYPESYNTAXDisplayString(SIZE(0..64))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"IPSLAs auto group name. Group is an aggregation of
operations sharing the same type, for example udp-jitter
type, with common characteristics like frequency,
interval etc. Groups are formed by policies dictated
either by customer, or by service level or any other
requirements."::={ cbQosMeasureIPSLACfgEntry 2}-- The cbQosServicePolicy groupcbQosServicePolicyTable OBJECT-TYPESYNTAXSEQUENCEOF CbQosServicePolicyEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table describes the logical interfaces/media types
and the policymap that are attached to it."::={ cbQosServicePolicy 1}cbQosServicePolicyEntry OBJECT-TYPESYNTAX CbQosServicePolicyEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry in this table describes to which a logical
interface a given policymap is attached. Depending on
the logical interface/media type, some fields may have
meaningful values, and some may not. Please see each
individual descriptions."INDEX{ cbQosPolicyIndex }::={ cbQosServicePolicyTable 1}
CbQosServicePolicyEntry ::=SEQUENCE{
cbQosPolicyIndex Unsigned32,
cbQosIfType InterfaceType,
cbQosPolicyDirection TrafficDirection,
cbQosIfIndex InterfaceIndex,
cbQosFrDLCI DlciNumber,
cbQosAtmVPI Unsigned32,
cbQosAtmVCI Unsigned32,
cbQosEntityIndex EntPhysicalIndexOrZero,
cbQosVlanIndex VlanIndex}cbQosPolicyIndex OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An arbitrary (system-assigned) index for all
service policies (PolicyMap that has been attached
to a given logical interface)."::={ cbQosServicePolicyEntry 1}cbQosIfType OBJECT-TYPESYNTAX InterfaceType
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This describes the logical interface/media type to
which this service policy is attached."::={ cbQosServicePolicyEntry 2}cbQosPolicyDirection OBJECT-TYPESYNTAX TrafficDirection
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This indicates the direction of traffic for which
this service policy is applied."::={ cbQosServicePolicyEntry 3}cbQosIfIndex OBJECT-TYPESYNTAXInterfaceIndexMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"ifIndex for the interface to which this service
is attached. This field makes sense only if the
logical interface has a snmp ifIndex. For e.g. the
value of this field is meaningless when the
cbQosIfType is controlPlane."::={ cbQosServicePolicyEntry 4}cbQosFrDLCI OBJECT-TYPESYNTAX DlciNumber
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"DLCI for the FRVC to which this service is attached.
This field only make sense if the service policy is
attached to a Frame Relay DLCI."::={ cbQosServicePolicyEntry 5}cbQosAtmVPI OBJECT-TYPESYNTAXUnsigned32(0..4095)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"VPI for the ATMVC to which this service is attached.
This field only make sense if the service policy is
attached to a ATM VC."::={ cbQosServicePolicyEntry 6}cbQosAtmVCI OBJECT-TYPESYNTAXUnsigned32(0..65535)
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"VCI for the ATMVC to which this service is attached.
This field only make sense if the service policy is
attached to a ATM VC."::={ cbQosServicePolicyEntry 7}cbQosEntityIndex OBJECT-TYPESYNTAX EntPhysicalIndexOrZero
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"In cases where the policy is attached to an entity
e.g. control-plane, this object represents the
entity physical index of the entity to which the
policy has been attached. A value zero may be
returned if the policy is not attached to a physical
entity or the entPhysicalTable is not supported on
the SNMP agent."::={ cbQosServicePolicyEntry 8}cbQosVlanIndex OBJECT-TYPESYNTAXVlanIndexMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"If the service policy is attached to a particular
vlan on a trunk or multi-vlan access port, then this
object specifies the corresponding VLAN. In all other
cases the value of this object is '0'."::={ cbQosServicePolicyEntry 9}-- End of the cbQosServicePolicy group
----
-- Beginning of cbQosInterfaceTablecbQosInterfacePolicyTable OBJECT-TYPESYNTAXSEQUENCEOF CbQosInterfacePolicyEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table describes the service polices that are
attached to main and sub interfaces."::={ cbQosInterfacePolicy 1}cbQosInterfacePolicyEntry OBJECT-TYPESYNTAX CbQosInterfacePolicyEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Using ifIndex and Direction, each unique index pair
translates to a service policy that is attached to a
main/sub interface, for particular traffic direction."INDEX{
ifIndex,
cbQosPolicyDirection
}::={ cbQosInterfacePolicyTable 1}
CbQosInterfacePolicyEntry ::=SEQUENCE{
cbQosIFPolicyIndex Unsigned32}cbQosIFPolicyIndex OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"An arbitrary (system-assigned) index for all
Service Policies.
This is identical to cbQosPolicyIndex."::={ cbQosInterfacePolicyEntry 1}-- End of cbQosInterfaceTable
---- Beginning of cbQosFrameRelayVCPolicycbQosFrameRelayPolicyTable OBJECT-TYPESYNTAXSEQUENCEOF CbQosFrameRelayPolicyEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table describes the service polices that are
attached to Frame Relay DLCIs."::={ cbQosFrameRelayVCPolicy 1}cbQosFrameRelayPolicyEntry OBJECT-TYPE
SYNTAX CbQosFrameRelayPolicyEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Using ifIndex, FR DLCI, and Direction, each unique
index combination translates to a service policy that
is attached to a FR DLCI, for particular traffic direction."INDEX{
ifIndex,
cbQosFrDLCI,
cbQosPolicyDirection
}::={ cbQosFrameRelayPolicyTable 1}
CbQosFrameRelayPolicyEntry ::=SEQUENCE{
cbQosFRPolicyIndex Unsigned32}cbQosFRPolicyIndex OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"An arbitrary (system-assigned) index for all
Service Policies.
This is identical to cbQosPolicyIndex."::={ cbQosFrameRelayPolicyEntry 1}-- End of cbQosFrameRelayTable
----
-- Beginning of cbQosATMPVCPolicycbQosATMPVCPolicyTable OBJECT-TYPESYNTAXSEQUENCEOF CbQosATMPVCPolicyEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table describes the policies that are attached to a
ATM PVC."::={ cbQosATMPVCPolicy 1}cbQosATMPVCPolicyEntry OBJECT-TYPESYNTAX CbQosATMPVCPolicyEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Using ifIndex, VPI, VCI, and Direction, each unique
index combination translates to a service policy that
is attached to a ATM VC, for particular traffic direction."INDEX{
ifIndex,
cbQosAtmVPI,
cbQosAtmVCI,
cbQosPolicyDirection
}::={ cbQosATMPVCPolicyTable 1}
CbQosATMPVCPolicyEntry ::=SEQUENCE{
cbQosATMPolicyIndex Unsigned32}cbQosATMPolicyIndex OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"An arbitrary (system-assigned) index for all
Service Policies.
This is identical to cbQosPolicyIndex."::={ cbQosATMPVCPolicyEntry 1}-- End of cbQosATMPVCTable
----
-- The cbQosObjects group
--
-- cbQosObjects TablecbQosObjectsTable OBJECT-TYPESYNTAXSEQUENCEOF CbQosObjectsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table specifies QoS objects (classmap, policymap,
match statements, and actions) hierarchy. This table also
provide relationship between each PolicyIndex/ObjectsIndex
pair and the ConfigIndex. ConfigIndex is essential for
querying any configuration tables."::={ cbQosObjects 1}cbQosObjectsEntry OBJECT-TYPESYNTAX CbQosObjectsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION
"A QoS object entry. Objects covered in this table are
PolicyMap, ClassMap, Match Statements, and Actions.
Each entry is indexed by system-generated cbQosPolicyIndex,
and cbQosObjectsIndex, which represents a runtime instance
of a QoS object. In conjunction with the
cbQosParentObjectsIndex, a management station can
determine the hierarchical relationship of those QoS
objects. Given that classmaps and service policies can
be nested entites, each entry in this table represents a
unique instance of such object. Each runtime object
instance has a corresponding config object, which contains
the configuration information of such QoS object. The
config object is indexed by cbQosConfigIndex."INDEX{
cbQosPolicyIndex,
cbQosObjectsIndex
}::={ cbQosObjectsTable 1}
CbQosObjectsEntry ::=SEQUENCE{
cbQosObjectsIndex Unsigned32,
cbQosConfigIndex Unsigned32,
cbQosObjectsType QosObjectType,
cbQosParentObjectsIndex Unsigned32}cbQosObjectsIndex OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An arbitrary (system-assigned) instance specific
index for cbQosObjectsEntry."::={ cbQosObjectsEntry 1}cbQosConfigIndex OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"An arbitrary (system-assigned) config (instance
independent) index for each Object. Each objects having
the same configuration share the same config index."::={ cbQosObjectsEntry 2}cbQosObjectsType OBJECT-TYPESYNTAX QosObjectType
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The type of the QoS object."::={ cbQosObjectsEntry 3}cbQosParentObjectsIndex OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The parent instance index of a QoS object.
For a ClassMap, the parent index would be the index of
the attached PolicyMap.
For a Match Statement, the parent index would be the
index of the ClassMap that uses this Match Statement.
For an action, the parent index would be the
index of the ClassMap that applies such Action.
For a non-hierarchical PolicyMap, the parent would be
the logical interface to which the policy is attached,
thus the parent index would be 0.
For a hierarchical PolicyMap, the parent index would
be the index of the ClassMap to which the nested
policy is attached."::={ cbQosObjectsEntry 4}-- end of cbQosObjectsTable
------ Start of cbQosPolicyMapCfgTablecbQosPolicyMapCfgTable OBJECT-TYPESYNTAXSEQUENCEOF CbQosPolicyMapCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table specifies Policymap configuration information"::={ cbQosPolicyMapCfg 1}cbQosPolicyMapCfgEntry OBJECT-TYPESYNTAX CbQosPolicyMapCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrent
DESCRIPTION"Each entry in this table describes configuration information
about a policymap. The information includes: Name, and it's
description. This table contains configuration information
only, no statistics associated with it. Therefore, it is
indexed by the cbQosConfigIndex of each PolicyMap."INDEX{ cbQosConfigIndex }::={ cbQosPolicyMapCfgTable 1}
CbQosPolicyMapCfgEntry ::=SEQUENCE{
cbQosPolicyMapName DisplayString,
cbQosPolicyMapDesc DisplayString}cbQosPolicyMapName OBJECT-TYPESYNTAXDisplayString(SIZE(0..255))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Name of the Policymap."::={ cbQosPolicyMapCfgEntry 1}cbQosPolicyMapDesc OBJECT-TYPESYNTAXDisplayString(SIZE(0..255))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Description of the PolicyMap."::={ cbQosPolicyMapCfgEntry 2}-- Start of cbQosPolicyMapCfgTable
------ Start of cbQosCMCfg GroupcbQosCMCfgTable OBJECT-TYPESYNTAXSEQUENCEOF CbQosCMCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table specifies ClassMap configuration information"::={ cbQosClassMapCfg 1}cbQosCMCfgEntry OBJECT-TYPESYNTAX CbQosCMCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry in this table describes configuration information
about a classmap. The information includes: Name, and it's
description and whether it is a Match-All or Match-Any
class. This table contains configuration information only,
no statistics associated with it. Therefore, it is indexed
by the cbQosConfigIndex of each ClassMap."INDEX{ cbQosConfigIndex }::={ cbQosCMCfgTable 1}
CbQosCMCfgEntry ::=SEQUENCE{
cbQosCMName DisplayString,
cbQosCMDesc DisplayString,
cbQosCMInfo QosClassInfo
}cbQosCMName OBJECT-TYPESYNTAXDisplayString(SIZE(0..255))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Name of the Classmap."::={ cbQosCMCfgEntry 1}cbQosCMDesc OBJECT-TYPESYNTAXDisplayString(SIZE(0..255))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION
"Description of the Classmap."::={ cbQosCMCfgEntry 2}cbQosCMInfo OBJECT-TYPESYNTAX QosClassInfo
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Match all vs Match any in a given class."::={ cbQosCMCfgEntry 3}-- End of cbQosCMCfg Group
------ Start of cbQosMatchStmtCfgTablecbQosMatchStmtCfgTable OBJECT-TYPESYNTAXSEQUENCEOF CbQosMatchStmtCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table specifies ClassMap configuration information"::={ cbQosMatchStmtCfg 1}cbQosMatchStmtCfgEntry OBJECT-TYPESYNTAX CbQosMatchStmtCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry in this table describes configuration information
about a MatchStatement. The information includes: Name,
and whether it is a Match or Match-Not
statement. This table contains configuration information
only, no statistics associated with it. Therefore, it is
indexed by the cbQosConfigIndex of each MatchStatement."INDEX{ cbQosConfigIndex }::={ cbQosMatchStmtCfgTable 1}
CbQosMatchStmtCfgEntry ::=SEQUENCE{
cbQosMatchStmtName DisplayString,
cbQosMatchStmtInfo QosMatchInfo
}cbQosMatchStmtName OBJECT-TYPESYNTAXDisplayString(SIZE(0..255))MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Name of the Match Statement."::={ cbQosMatchStmtCfgEntry 1}cbQosMatchStmtInfo OBJECT-TYPESYNTAX QosMatchInfo
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Match vs Match Not in a given class."::={ cbQosMatchStmtCfgEntry 2}-- End of cbQosMatchStmtCfgTable
------ Start of cbQosQueueingCfgTablecbQosQueueingCfgTable OBJECT-TYPESYNTAXSEQUENCEOF CbQosQueueingCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table specifies Queueing Action configuration
information"::={ cbQosQueueingCfg 1}cbQosQueueingCfgEntry OBJECT-TYPESYNTAX CbQosQueueingCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry in this table describes configuration
information about a queueing action. The information
includes: Bandwidth, Units, Flow Enabled, Priority Enabled,
and Q size.
This table contains configuration information only,
no statistics associated with it. Therefore, it is indexed
by the cbQosConfigIndex of each Queueing Action."INDEX{ cbQosConfigIndex }::={ cbQosQueueingCfgTable 1}
CbQosQueueingCfgEntry ::=SEQUENCE{
cbQosQueueingCfgBandwidth Integer32,
cbQosQueueingCfgBandwidthUnits QueueingBandwidthUnits,
cbQosQueueingCfgFlowEnabled TruthValue,
cbQosQueueingCfgPriorityEnabled TruthValue,
cbQosQueueingCfgAggregateQSize Integer32,
cbQosQueueingCfgIndividualQSize Integer32,
cbQosQueueingCfgDynamicQNumber Integer32,
cbQosQueueingCfgPrioBurstSize Unsigned32,
cbQosQueueingCfgQLimitUnits CbQosQueueUnitType,
cbQosQueueingCfgAggregateQLimit CbQosQueueDepth,
cbQosQueueingCfgAggrQLimitTime Unsigned32}cbQosQueueingCfgBandwidth OBJECT-TYPESYNTAXInteger32(0..2000000)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The configured bandwidth allocated to this traffic
class. In the case of a bandwidth policy, this value
represents a minimum b/w guarantee for the traffic
class. In the case of a priority policy, this value
represents the maximum rate at which priority service
is guaranteed."::={ cbQosQueueingCfgEntry 1}cbQosQueueingCfgBandwidthUnits OBJECT-TYPESYNTAX QueueingBandwidthUnits
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Units of the accompanying cbQosQueueingCfgbandwidth
parameter."::={ cbQosQueueingCfgEntry 2}cbQosQueueingCfgFlowEnabled OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Boolean to indicate if flow-based fair-queue is
enabled for this class."::={ cbQosQueueingCfgEntry 3}cbQosQueueingCfgPriorityEnabled OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Boolean to indicate if low latency queueing
(priority) is enabled for this class."::={ cbQosQueueingCfgEntry 4}cbQosQueueingCfgAggregateQSize OBJECT-TYPESYNTAXInteger32(0..65535)UNITS"Packets"MAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"Maximum number of packets that can be held in all the
individual queues associated with this class
before packets are dropped. This object is deprecated
by cbQosQueueingCfgAggregateQLimit."::={ cbQosQueueingCfgEntry 5}cbQosQueueingCfgIndividualQSize OBJECT-TYPESYNTAXInteger32(1..32768)UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Maximum number of packets that can be held in an
individual Flow-based fair-queue associated with this
class before it drops packets (once the AggregateQSize
has been reached).
This field only makes sense in the context of
Flow-based fair-queueing."::={ cbQosQueueingCfgEntry 6}cbQosQueueingCfgDynamicQNumber OBJECT-TYPESYNTAXInteger32(1..32768)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of dynamic queues supported when
flow-based fair-queue is in use."::={ cbQosQueueingCfgEntry 7}cbQosQueueingCfgPrioBurstSize OBJECT-TYPESYNTAXUnsigned32(32..64000000)UNITS"Bytes"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"In the priority queue, this is the number of bytes
allowed in a single burst.
This parameter only makes sense if Priority is enabled"::={ cbQosQueueingCfgEntry 8}cbQosQueueingCfgQLimitUnits OBJECT-TYPESYNTAX CbQosQueueUnitType
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Represents the unit type of
cbQosQueueingCfgAggregateQLimit object."::={ cbQosQueueingCfgEntry 9}cbQosQueueingCfgAggregateQLimit OBJECT-TYPESYNTAX CbQosQueueDepth
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Maximum allowed queue size for all the individual
queues associated with this class. When the queue size
exceed this value, the packets will be dropped."::={ cbQosQueueingCfgEntry 10}cbQosQueueingCfgAggrQLimitTime OBJECT-TYPESYNTAXUnsigned32UNITS"milli-seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Maximum allowed queue size in milli-seconds for all
individual queues associated with this class. It
is internally converted to bytes by using the
bandwidth that is available for the class."::={ cbQosQueueingCfgEntry 11}-- End of cbQosQueueingCfg Group
----
-- The cbQosREDCfg group
--
-- cbQosREDTablecbQosREDCfgTable OBJECT-TYPESYNTAXSEQUENCEOF CbQosREDCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table specifies WRED Action configuration
information"::={ cbQosREDCfg 1}cbQosREDCfgEntry OBJECT-TYPESYNTAX CbQosREDCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry in this table describes configuration
information about a WRED Action. The table holds global
(per traffic class) configuration like: Expon Weight
and Mean Q size.
This table contains configuration information only,
no statistics associated with it. Therefore, it is indexed
by the cbQosConfigIndex of each WRED Action."INDEX{ cbQosConfigIndex }::={ cbQosREDCfgTable 1}
CbQosREDCfgEntry ::=SEQUENCE{
cbQosREDCfgExponWeight Integer32,
cbQosREDCfgMeanQsize Integer32,
cbQosREDCfgDscpPrec REDMechanism,
cbQosREDCfgECNEnabled TruthValue}cbQosREDCfgExponWeight OBJECT-TYPESYNTAXInteger32(1..16)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The decay factor for the queue average calculation.
The decay factor is equal to raising 2 to the power
of N, where N could be up to 16.
The smaller the number, the faster it decays."::={ cbQosREDCfgEntry 1}cbQosREDCfgMeanQsize OBJECT-TYPESYNTAXInteger32(0..65535)UNITS"Packets"MAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"The average queue size, computed and used by the WRED
algorithm. This is deprecated by cbQosREDMeanQsize."::={ cbQosREDCfgEntry 2}cbQosREDCfgDscpPrec OBJECT-TYPESYNTAX REDMechanism
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The Classification mechanism used by RED"::={ cbQosREDCfgEntry 3}cbQosREDCfgECNEnabled OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Boolean to indicate if explicit congestion notification
enabled for this class."::={ cbQosREDCfgEntry 4}-- end of cbQosREDCfgTable
------ cbQosREDClassCfg GroupcbQosREDClassCfgTable OBJECT-TYPESYNTAXSEQUENCEOF CbQosREDClassCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table specifies WRED Action configuration
information on a per IP precedence basis."::={ cbQosREDClassCfg 1}cbQosREDClassCfgEntry OBJECT-TYPESYNTAX CbQosREDClassCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry in this table describes configuration information
about a WRED Action. The table holds the per IP precedence
based WRED configuration parameters.
This table contains configuration information only,
no statistics associated with it. Therefore, it is indexed
by the cbQosConfigIndex and cbQosREDValue
of each WRED Action."INDEX{
cbQosConfigIndex,
cbQosREDValue
}::={ cbQosREDClassCfgTable 1}
CbQosREDClassCfgEntry ::=SEQUENCE{
cbQosREDValue Integer32,
cbQosREDCfgMinThreshold Integer32,
cbQosREDCfgMaxThreshold Integer32,
cbQosREDCfgPktDropProb Integer32,
cbQosREDClassCfgThresholdUnit CbQosQueueUnitType,
cbQosREDClassCfgMinThreshold CbQosQueueDepth,
cbQosREDClassCfgMaxThreshold CbQosQueueDepth,
cbQosREDClassCfgMinThresholdTime Unsigned32,
cbQosREDClassCfgMaxThresholdTime Unsigned32}cbQosREDValue OBJECT-TYPESYNTAXInteger32(0..63)MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The IP precedence or IP DSCP of this entry."::={ cbQosREDClassCfgEntry 1}cbQosREDCfgMinThreshold OBJECT-TYPESYNTAXInteger32(1..32768)UNITS"Packets"MAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"Minimum threshold in number of packets. When the
average queue length reaches this number, WRED begins
to drop packets with the specified IP precedence.
This is deprecated by cbQosREDClassCfgMinThreshold."::={ cbQosREDClassCfgEntry 2}cbQosREDCfgMaxThreshold OBJECT-TYPESYNTAXInteger32(1..32768)UNITS"Packets"MAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"Maximum threshold in number of packets. When the
average queue length exceeds this number, WRED drops
all packets with the specified IP precedence.
This is deprecated by cbQosREDClassCfgMaxThreshold."::={ cbQosREDClassCfgEntry 3}cbQosREDCfgPktDropProb OBJECT-TYPESYNTAXInteger32(1..65536)UNITS""MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Denominator for the fraction of packets dropped when
the average queue depth is MaxDepthThreshold. For
example, if the denominator is 10, one out of every 10
packets is dropped when the average queue is at the
MaxDepthThreshold."::={ cbQosREDClassCfgEntry 4}cbQosREDClassCfgThresholdUnit OBJECT-TYPESYNTAX CbQosQueueUnitType
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Represents the unit type to measure the RED thresholds.
The objects covered are cbQosREDClassCfgMinThreshold
and cbQosREDClassCfgMaxThreshold."::={ cbQosREDClassCfgEntry 5}cbQosREDClassCfgMinThreshold OBJECT-TYPESYNTAX CbQosQueueDepth
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The minimum WRED threshold value. When the average
queue length reaches this number, WRED begins to
drop packets according to REDMechanism specificed
in cbQosREDCfgDscpPrec."::={ cbQosREDClassCfgEntry 6}cbQosREDClassCfgMaxThreshold OBJECT-TYPESYNTAX CbQosQueueDepth
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The maximum WRED threshold value. When the average
queue length exceeds this number, WRED drops all
packets according to REDMechanism specificed
in cbQosREDCfgDscpPrec."::={ cbQosREDClassCfgEntry 7}cbQosREDClassCfgMinThresholdTime OBJECT-TYPESYNTAXUnsigned32UNITS"milli-seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The minimum WRED threshold value specified in
milli-seconds. The milli-second value is internally
converted to bytes by using the bandwidth that
is available for the class."::={ cbQosREDClassCfgEntry 8}cbQosREDClassCfgMaxThresholdTime OBJECT-TYPESYNTAXUnsigned32UNITS"milli-seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The maximum WRED threshold value specified in
milli-seconds. The milli-second value is internally
converted to bytes by using the bandwidth that
is available for the class."::={ cbQosREDClassCfgEntry 9}-- end of cbQosREDClassCfg Group
----
-- Start of cbQosPoliceCfg GroupcbQosPoliceCfgTable OBJECT-TYPESYNTAXSEQUENCEOF CbQosPoliceCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table specifies Police Action configuration
information."::={ cbQosPoliceCfg 1}cbQosPoliceCfgEntry OBJECT-TYPESYNTAX CbQosPoliceCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry in this table describes configuration information
about a Police Action. The table holds Policy
configuration parameters, such as rate, burst size, and
actions based on traffic rates.
This table contains configuration information only,
no statistics associated with it. Therefore, it is indexed
by the cbQosConfigIndex."INDEX{ cbQosConfigIndex }::={ cbQosPoliceCfgTable 1}
CbQosPoliceCfgEntry ::=SEQUENCE{
cbQosPoliceCfgRate Unsigned32,
cbQosPoliceCfgBurstSize Unsigned32,
cbQosPoliceCfgExtBurstSize Unsigned32,
cbQosPoliceCfgConformAction PoliceAction,
cbQosPoliceCfgConformSetValue Unsigned32,
cbQosPoliceCfgExceedAction PoliceAction,
cbQosPoliceCfgExceedSetValue Unsigned32,
cbQosPoliceCfgViolateAction PoliceAction,
cbQosPoliceCfgViolateSetValue Unsigned32,
cbQosPoliceCfgPir Unsigned32,
cbQosPoliceCfgRate64 Unsigned64,
cbQosPoliceCfgRateType CbQosRateType,
cbQosPoliceCfgPercentRateValue Unsigned32,
cbQosPoliceCfgPercentPirValue Unsigned32,
cbQosPoliceCfgCellRate Unsigned32,
cbQosPoliceCfgCellPir Unsigned32,
cbQosPoliceCfgBurstCell Unsigned32,
cbQosPoliceCfgExtBurstCell Unsigned32,
cbQosPoliceCfgBurstTime Unsigned32,
cbQosPoliceCfgExtBurstTime Unsigned32,
cbQosPoliceCfgCdvt Unsigned32,
cbQosPoliceCfgConformColor DisplayString,
cbQosPoliceCfgExceedColor DisplayString}cbQosPoliceCfgRate OBJECT-TYPESYNTAXUnsigned32(8000..2000000000)UNITS"bits/second"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The committed policing rate. This is the sustained
rate permitted by policing.
If a committed policing rate greater than 2000000000
is configurable on the system, then the configured
rate is available in cbQosPoliceCfgRate64."::={ cbQosPoliceCfgEntry 1}cbQosPoliceCfgBurstSize OBJECT-TYPESYNTAXUnsigned32(1000..512000000)UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The amount of traffic, in bytes, in excess of the
committed policing rate that will be permitted by
the policing feature."::={ cbQosPoliceCfgEntry 2}cbQosPoliceCfgExtBurstSize OBJECT-TYPESYNTAXUnsigned32(1000..512000000)UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The amount of traffic, in bytes, in excess of the
burst limit, which may be conditionally permitted
by the policing feature. The probability that the
traffic is not permitted increases as the received
burst size increases."::={ cbQosPoliceCfgEntry 3}cbQosPoliceCfgConformAction OBJECT-TYPESYNTAX PoliceAction
MAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"Action to be taken when the traffic is within the
configured rate, that is, the traffic rate is
conforming.
This object is deprecated and defined in
cbQosPoliceActionCfgTable."::={ cbQosPoliceCfgEntry 4}cbQosPoliceCfgConformSetValue OBJECT-TYPESYNTAXUnsigned32(1..99)MAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"New packet attribute values for each packets that
conforms to the configured Police rate.
This object is deprecated and defined in
cbQosPoliceActionCfgTable."::={ cbQosPoliceCfgEntry 5}cbQosPoliceCfgExceedAction OBJECT-TYPESYNTAX PoliceAction
MAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"Action to be taken when the traffic exceeds the
configured rate, that is, the traffic is
non-conforming.
This object is deprecated and defined in
cbQosPoliceActionCfgTable."::={ cbQosPoliceCfgEntry 6}cbQosPoliceCfgExceedSetValue OBJECT-TYPESYNTAXUnsigned32(1..99)MAX-ACCESSread-only
STATUSdeprecatedDESCRIPTION"New packet attribute values for each packets that
conforms to the configured Police rate.
This object is deprecated and defined in
cbQosPoliceActionCfgTable."::={ cbQosPoliceCfgEntry 7}cbQosPoliceCfgViolateAction OBJECT-TYPESYNTAX PoliceAction
MAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"Action to be taken when the traffic exceeds the
conform and exceed token buckets.
This object is deprecated and defined in
cbQosPoliceActionCfgTable."::={ cbQosPoliceCfgEntry 8}cbQosPoliceCfgViolateSetValue OBJECT-TYPESYNTAXUnsigned32(1..99)MAX-ACCESSread-onlySTATUSdeprecatedDESCRIPTION"New packet attribute values for each packets that
conforms to the Police violate action. The packet
attibute values depend on the action that is taken
for the particular packet. For example, if the
action was to set the dscp value, this entry describes
the value it is set to.
This object is deprecated and defined in
cbQosPoliceActionCfgTable."::={ cbQosPoliceCfgEntry 9}cbQosPoliceCfgPir OBJECT-TYPESYNTAXUnsigned32(8000..2000000000)UNITS"bits/second"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The committed policing rate. This is the peak
rate permitted by two rate policing."::={ cbQosPoliceCfgEntry 10}cbQosPoliceCfgRate64 OBJECT-TYPESYNTAXUnsigned64UNITS"bits/second"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The committed policing rate. This is the sustained
rate permitted by policing."::={ cbQosPoliceCfgEntry 11}cbQosPoliceCfgRateType OBJECT-TYPESYNTAX CbQosRateType
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The rate type that configured for CIR & PIR.
1 means rates are configured in bps.
2 means rates are configured in percentage.
3 means rates are configured in cps."::={ cbQosPoliceCfgEntry 12}cbQosPoliceCfgPercentRateValue OBJECT-TYPESYNTAXUnsigned32(0..100)UNITS"% of Interface Bandwidth"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The committed policing rate in percentage. Its value
is valid only when cbQosPoliceCfgRateType equals to 2."::={ cbQosPoliceCfgEntry 13}cbQosPoliceCfgPercentPirValue OBJECT-TYPESYNTAXUnsigned32(0..100)UNITS"% of Interface Bandwidth"MAX-ACCESSread-only
STATUScurrentDESCRIPTION"The peak policing rate in percentage. Its value is
valid only when cbQosPoliceCfgRateType equals to 2."::={ cbQosPoliceCfgEntry 14}cbQosPoliceCfgCellRate OBJECT-TYPESYNTAXUnsigned32UNITS"cells/second"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The committed policing rate in cells/second. Its value
is valid only when cbQosPoliceCfgRateType equals to 3."::={ cbQosPoliceCfgEntry 15}cbQosPoliceCfgCellPir OBJECT-TYPESYNTAXUnsigned32UNITS"cells/second"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The peak policing rate in cells/second. Its value is
valid only when cbQosPoliceCfgRateType equals to 3."::={ cbQosPoliceCfgEntry 16}cbQosPoliceCfgBurstCell OBJECT-TYPESYNTAXUnsigned32(0..9660377)UNITS"Cells"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The amount of traffic, in cells, in excess of the
committed policing rate that will be permitted by
the policing feature."::={ cbQosPoliceCfgEntry 17}cbQosPoliceCfgExtBurstCell OBJECT-TYPESYNTAXUnsigned32(0..9660377)UNITS"Cells"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The amount of traffic, in cells, in excess of the
burst limit, which may be conditionally permitted
by the policing feature. The probability that the
traffic is not permitted increases as the received
burst size increases."::={ cbQosPoliceCfgEntry 18}cbQosPoliceCfgBurstTime OBJECT-TYPESYNTAXUnsigned32(0..2000)UNITS"milli-seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The amount of traffic time, in ms, in excess of the
committed policing rate that will be permitted by
the policing feature. The milli-second value is
internally converted to bytes by using the bandwidth
that is available for the class."::={ cbQosPoliceCfgEntry 19}cbQosPoliceCfgExtBurstTime OBJECT-TYPESYNTAXUnsigned32(0..2000)UNITS"milli-seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The amount of traffic time, in ms, in excess of the
burst limit, which may be conditionally permitted
by the policing feature. The probability that the
traffic is not permitted increases as the received
burst size increases. The milli-second value is
internally converted to bytes by using the bandwidth
that is available for the class."::={ cbQosPoliceCfgEntry 20}cbQosPoliceCfgCdvt OBJECT-TYPESYNTAXUnsigned32(0..1000000)UNITS"micro-second"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The ATM Cell Delay Variation Tolerance value."::={ cbQosPoliceCfgEntry 21}cbQosPoliceCfgConformColor OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The Classmap name used in AF color-aware mode to
specify the conform-color for the incoming packets
which was marked by the previous node.
At least conform-color must be specified. If only
conform-color is specified, all other packets are
assumed to be marked exceed.
See RFC 2697, A Single Rate Three Color Marker.
See RFC 2698, A Two Rate Three Color Marker."::={ cbQosPoliceCfgEntry 22}cbQosPoliceCfgExceedColor OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The Classmap name used in AF color-aware mode to
specify the exceed-color for the incoming packets
which was marked by the previous node.
If both conform-color and exceed-color are specified,
all other packets are assumed to be marked violate.
Violate-color configuration is not needed."::={ cbQosPoliceCfgEntry 23}-- end of cbQosPoliceCfg Group
----
-- Start of cbQosPoliceActionCfg GroupcbQosPoliceActionCfgTable OBJECT-TYPESYNTAXSEQUENCEOF CbQosPoliceActionCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table specifies Police Action configuration
information."::={ cbQosPoliceActionCfg 1}cbQosPoliceActionCfgEntry OBJECT-TYPESYNTAX CbQosPoliceActionCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry in this table describes configuration information
about Actions for one Police. The table holds Police
action specific configuration parameters.
This table is a sub-table for cbQosPoliceCfgTable. There is
a 1-to-1 association between one entry here and one entry in
cbQosPoliceCfgTable.
This table contains configuration information only,
no statistics associated with it.
This table has two indices. The first is cbQosConfigIndex
which is drived directly from cbQosPoliceCfgTable to keep the
1-to-1 mapping nature between two tables.
The second is cbQosPoliceActionCfgIndex used to reference
the actual actions configured. The maximum number of actions
supported is determined by the system, which is 5 currently."INDEX{
cbQosConfigIndex,
cbQosPoliceActionCfgIndex
}::={ cbQosPoliceActionCfgTable 1}
CbQosPoliceActionCfgEntry ::=SEQUENCE{
cbQosPoliceActionCfgIndex Unsigned32,
cbQosPoliceActionCfgConform PoliceAction,
cbQosPoliceActionCfgConformSetValue Unsigned32,
cbQosPoliceActionCfgExceed PoliceAction,
cbQosPoliceActionCfgExceedSetValue Unsigned32,
cbQosPoliceActionCfgViolate PoliceAction,
cbQosPoliceActionCfgViolateSetValue Unsigned32}cbQosPoliceActionCfgIndex OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An arbitrary (system-assigned) index for police
actions that are defined by a police configuration."::={ cbQosPoliceActionCfgEntry 1}cbQosPoliceActionCfgConform OBJECT-TYPESYNTAX PoliceAction
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Action to be taken when the traffic exceeds the
conform and exceed token buckets."::={ cbQosPoliceActionCfgEntry 2}cbQosPoliceActionCfgConformSetValue OBJECT-TYPESYNTAXUnsigned32(0..99)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"New packet attribute values for each packet set by
police action defined in cbQosPoliceActionCfgConform.
This object will be set to zero if the corresponding
police action does not require a set value, such as
no action, drop action or transmit action."::={ cbQosPoliceActionCfgEntry 3}cbQosPoliceActionCfgExceed OBJECT-TYPESYNTAX PoliceAction
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Action to be taken when the traffic exceeds the
conform and exceed token buckets."::={ cbQosPoliceActionCfgEntry 4}cbQosPoliceActionCfgExceedSetValue OBJECT-TYPESYNTAXUnsigned32(0..99)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"New packet attribute values for each packet set by
police action defined in cbQosPoliceActionCfgExceed.
This object will be set to zero if the corresponding
police action does not require a set value, such as
no action, drop action or transmit action."::={ cbQosPoliceActionCfgEntry 5}cbQosPoliceActionCfgViolate OBJECT-TYPESYNTAX PoliceAction
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Action to be taken when the traffic exceeds the
conform and exceed token buckets."::={ cbQosPoliceActionCfgEntry 6}cbQosPoliceActionCfgViolateSetValue OBJECT-TYPESYNTAXUnsigned32(0..99)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"New packet attribute values for each packet set by
police action defined in cbQosPoliceActionCfgViolate.
This object will be set to zero if the corresponding
police action does not require a set value, such as
no action, drop action or transmit action."::={ cbQosPoliceActionCfgEntry 7}-- end of cbQosPoliceActionCfg Group
----
-- The cbQosTSCfg group
--
-- cbQosTSCfgTablecbQosTSCfgTable OBJECT-TYPESYNTAXSEQUENCEOF CbQosTSCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table specifies traffic-shaping Action configuration
information."::={ cbQosTSCfg 1}cbQosTSCfgEntry OBJECT-TYPESYNTAX CbQosTSCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry in this table describes configuration information
about a traffic-shaping Action. The table holds Traffic
Shaping configuration parameters, such as rate, burst size,
and Shaping types.
This table contains configuration information only,
no statistics associated with it. Therefore, it is indexed
by the cbQosConfigIndex."INDEX{ cbQosConfigIndex }::={ cbQosTSCfgTable 1}
CbQosTSCfgEntry ::=SEQUENCE{
cbQosTSCfgRate Integer32,
cbQosTSCfgBurstSize Integer32,
cbQosTSCfgExtBurstSize Integer32,
cbQosTSCfgAdaptiveEnabled TruthValue,
cbQosTSCfgAdaptiveRate Integer32,
cbQosTSCfgLimitType TrafficShapingLimit,
cbQosTSCfgRateType CbQosRateType,
cbQosTSCfgPercentRateValue Unsigned32,
cbQosTSCfgBurstTime Unsigned32,
cbQosTSCfgExtBurstTime Unsigned32,
cbQosTSCfgRate64 Unsigned64}cbQosTSCfgRate OBJECT-TYPESYNTAXInteger32(8000..154400000)UNITS"bits/second"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The committed traffic-shaping rate. This is the
sustained rate permitted by the traffic-shaping."::={ cbQosTSCfgEntry 1}cbQosTSCfgBurstSize OBJECT-TYPESYNTAXInteger32(256..154400000)UNITS"bits"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The amount of traffic, in bits, in excess of the
committed traffic-shaping rate that will be
instantaneously permitted by this feature."::={ cbQosTSCfgEntry 2}cbQosTSCfgExtBurstSize OBJECT-TYPESYNTAXInteger32(0..154400000)UNITS"bits"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The amount of traffic, in bits, in excess of the
burst limit, which may be conditionally permitted
by traffic-shaping feature."::={ cbQosTSCfgEntry 3}cbQosTSCfgAdaptiveEnabled OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates is adaptive traffic-shaping
has been enabled."::={ cbQosTSCfgEntry 4}cbQosTSCfgAdaptiveRate OBJECT-TYPESYNTAXInteger32(8000..154400000)UNITS"bits/second"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object represents the current adaptive traffic
shaping rate."::={ cbQosTSCfgEntry 5}cbQosTSCfgLimitType OBJECT-TYPESYNTAX TrafficShapingLimit
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates if traffic-shaping is limiting
traffic based on the peak rate or the average rate."::={ cbQosTSCfgEntry 6}cbQosTSCfgRateType OBJECT-TYPESYNTAX CbQosRateType
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The rate type that configured for traffic-shaping.
1 means rate is configured in bps.
2 means rate is configured in percentage."::={ cbQosTSCfgEntry 7}cbQosTSCfgPercentRateValue OBJECT-TYPESYNTAXUnsigned32(0..100)UNITS"% of Interface Bandwidth"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The committed traffic-shaping rate in percentage.
Its value is valid only when cbQosTSCfgRateType
equals to 2."::={ cbQosTSCfgEntry 8}cbQosTSCfgBurstTime OBJECT-TYPESYNTAXUnsigned32(0..2000)UNITS"milli-seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The amount of traffic, in ms, in excess of the
committed traffic-shaping rate that will be
instantaneously permitted by this feature.
The milli-second value is internally converted to
bits by using the bandwidth that is available for
the class."::={ cbQosTSCfgEntry 9}cbQosTSCfgExtBurstTime OBJECT-TYPESYNTAXUnsigned32(0..2000)UNITS"milli-seconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The amount of traffic, in ms, in excess of the
burst limit, which may be conditionnally permitted
by traffic-shaping feature.
The milli-second value is internally converted to
bits by using the bandwidth that is available for
the class."::={ cbQosTSCfgEntry 10}cbQosTSCfgRate64 OBJECT-TYPESYNTAXUnsigned64UNITS"bits/second"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The committed shape rate. This is the sustained
rate permitted by shaping. This object represents
the 64 bit value of object cbQosTSCfgRate"::={ cbQosTSCfgEntry 11}-- end of cbQosTSCfgTable
--
-- The cbQosSetCfgObject group
--
-- cbQosSetCfgcbQosSetCfgTable OBJECT-TYPESYNTAXSEQUENCEOF CbQosSetCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table specifies Packet Marking Action configuration
information."::={ cbQosSetCfg 1}cbQosSetCfgEntry OBJECT-TYPESYNTAX CbQosSetCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry in this table describes configuration information
about a Packet Marking Action. The table holds Packet
Marking configuration parameters, such as type of packet
marking and values being set to.
This table contains configuration information only,
no statistics associated with it. Therefore, it is indexed
by the cbQosConfigIndex."INDEX{ cbQosConfigIndex }::={ cbQosSetCfgTable 1}
CbQosSetCfgEntry ::=SEQUENCE{
cbQosSetCfgFeature SetFeatureType,
cbQosSetCfgIpDSCPValue Integer32,
cbQosSetCfgIpPrecedenceValue Integer32,
cbQosSetCfgQosGroupValue Integer32,
cbQosSetCfgL2CosValue Integer32,
cbQosSetCfgMplsExpValue Unsigned32,
cbQosSetCfgDiscardClassValue Unsigned32,
cbQosSetCfgMplsExpTopMostValue Unsigned32,
cbQosSetCfgSrpPriority Unsigned32,
cbQosSetCfgFrFecnBecn Unsigned32}cbQosSetCfgFeature OBJECT-TYPESYNTAX SetFeatureType
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The bit-wise position of each packet marking feature."::={ cbQosSetCfgEntry 1}cbQosSetCfgIpDSCPValue OBJECT-TYPESYNTAXInteger32(0..63)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The IP DSCP value at which the packet is being set
by the packet marking feature."::={ cbQosSetCfgEntry 2}cbQosSetCfgIpPrecedenceValue OBJECT-TYPESYNTAXInteger32(0..7)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The IP precedence value at which the packet is being
set by the packet marking feature."::={ cbQosSetCfgEntry 3}cbQosSetCfgQosGroupValue OBJECT-TYPESYNTAXInteger32(0..99)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The QoS Group number at which the packet is being
set by the packet marking feature."::={ cbQosSetCfgEntry 4}cbQosSetCfgL2CosValue OBJECT-TYPESYNTAXInteger32(0..7)
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The Layer 2 Cos value at which the packet is being
set by the packet marking feature."::={ cbQosSetCfgEntry 5}cbQosSetCfgMplsExpValue OBJECT-TYPESYNTAXUnsigned32(0..7)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The MPLS experimental value at which the packet
is being set by the packet marking feature."::={ cbQosSetCfgEntry 6}cbQosSetCfgDiscardClassValue OBJECT-TYPESYNTAXUnsigned32(0..7)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The Discard Class value at which the packet
is being set by the packet marking feature."::={ cbQosSetCfgEntry 7}cbQosSetCfgMplsExpTopMostValue OBJECT-TYPESYNTAXUnsigned32(0..7)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The MPLS experimental value on the topmost label
at which the packet is being set by the packet marking
feature."::={ cbQosSetCfgEntry 8}cbQosSetCfgSrpPriority OBJECT-TYPESYNTAXUnsigned32(0..7)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The SRP Priority value at which the packet is being set
by the packet marking feature. The higher the value the
higher the priority. SRP is a Cisco developed protocol.
RFC 2892: The Cisco SRP MAC Layer Protocol."::={ cbQosSetCfgEntry 9}cbQosSetCfgFrFecnBecn OBJECT-TYPESYNTAXUnsigned32(0..99)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is a configurable parameter in percentage of the
queue size. When the current queue size out of the
queue limit is greater than this parameter, both
Frame Relay FECN and BECN bits will be set for
Frame Relay congestion notification mechanism."::={ cbQosSetCfgEntry 10}-- end of cbQosSetCfgTablecbQosCMStatsTable OBJECT-TYPESYNTAXSEQUENCEOF CbQosCMStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table specifies ClassMap related Statistical
information."::={ cbQosClassMapStats 1}cbQosCMStatsEntry OBJECT-TYPESYNTAX CbQosCMStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry in this table describes the statistical
information about ClassMap. ClassMap specific information
you can find in this table are : pre/post policy pkt/byte
counts, bit rates, drop pkt/bytes and no buffer drops.
This table contains statistical information only,
no configuration information associated with it. Therefore,
it is indexed by the instance specific IDs, such as
cbQosPolicyIndex and cbQosObjectsIndex."INDEX{
cbQosPolicyIndex,
cbQosObjectsIndex
}::={ cbQosCMStatsTable 1}
CbQosCMStatsEntry ::=SEQUENCE{
cbQosCMPrePolicyPktOverflow Counter32,
cbQosCMPrePolicyPkt Counter32,
cbQosCMPrePolicyPkt64 Counter64,
cbQosCMPrePolicyByteOverflow Counter32,
cbQosCMPrePolicyByte Counter32,
cbQosCMPrePolicyByte64 Counter64,
cbQosCMPrePolicyBitRate Gauge32,
cbQosCMPostPolicyByteOverflow Counter32,
cbQosCMPostPolicyByte Counter32,
cbQosCMPostPolicyByte64 Counter64,
cbQosCMPostPolicyBitRate Gauge32,
cbQosCMDropPktOverflow Counter32,
cbQosCMDropPkt Counter32,
cbQosCMDropPkt64 Counter64,
cbQosCMDropByteOverflow Counter32,
cbQosCMDropByte Counter32,
cbQosCMDropByte64 Counter64,
cbQosCMDropBitRate Gauge32,
cbQosCMNoBufDropPktOverflow Counter32,
cbQosCMNoBufDropPkt Counter32,
cbQosCMNoBufDropPkt64 Counter64}cbQosCMPrePolicyPktOverflow OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The upper 32 bits count of inbound packets prior to
executing any QoS policies."::={ cbQosCMStatsEntry 1}cbQosCMPrePolicyPkt OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The lower 32 bits count of inbound packets prior to
executing any QoS policies."::={ cbQosCMStatsEntry 2}cbQosCMPrePolicyPkt64 OBJECT-TYPESYNTAXCounter64MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of inbound packets prior to executing
any QoS policies."::={ cbQosCMStatsEntry 3}cbQosCMPrePolicyByteOverflow OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The upper 32 bits count of inbound octets prior to
executing any QoS policies."::={ cbQosCMStatsEntry 4}cbQosCMPrePolicyByte OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The lower 32 bits count of inbound octets prior to
executing any QoS policies."::={ cbQosCMStatsEntry 5}cbQosCMPrePolicyByte64 OBJECT-TYPESYNTAXCounter64MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of inbound octets prior to executing
any QoS policies."::={ cbQosCMStatsEntry 6}cbQosCMPrePolicyBitRate OBJECT-TYPESYNTAXGauge32UNITS"bits per second"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The bit rate of the traffic prior to executing any QoS
policies."::={ cbQosCMStatsEntry 7}cbQosCMPostPolicyByteOverflow OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The upper 32 bits count of outbound octets after executing
QoS policies."::={ cbQosCMStatsEntry 8}cbQosCMPostPolicyByte OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The lower 32 bits count of outbound octets after executing
QoS policies."::={ cbQosCMStatsEntry 9}cbQosCMPostPolicyByte64 OBJECT-TYPESYNTAXCounter64MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of outbound octets after executing
QoS policies."::={ cbQosCMStatsEntry 10}cbQosCMPostPolicyBitRate OBJECT-TYPESYNTAXGauge32UNITS"bits per second"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The bit rate of the traffic after executing QoS
policies."::={ cbQosCMStatsEntry 11}cbQosCMDropPktOverflow OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The upper 32 bits counter of dropped pkts per class
as the result of all features that can produce drops
(e.g., police, random detect, etc.)."::={ cbQosCMStatsEntry 12}cbQosCMDropPkt OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The lower 32 bits counter of dropped pkts per class
as the result of all features that can produce drops
(e.g., police, random detect, etc.)."::={ cbQosCMStatsEntry 13}cbQosCMDropPkt64 OBJECT-TYPESYNTAXCounter64MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits counter of dropped pkts per class as
the result of all features that can produce drops
(e.g., police, random detect, etc.)."::={ cbQosCMStatsEntry 14}cbQosCMDropByteOverflow OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The upper 32 bits counter of dropped bytes per class
as the result of all features that can produce drops
(e.g., police, random detect, etc.)."::={ cbQosCMStatsEntry 15}cbQosCMDropByte OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The lower 32 bits counter of dropped bytes per class
as the result of all features that can produce drops
(e.g., police, random detect, etc.)."::={ cbQosCMStatsEntry 16}cbQosCMDropByte64 OBJECT-TYPESYNTAXCounter64MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits counter of dropped bytes per class as the
result of all features that can produce drops
(e.g., police, random detect, etc.)."::={ cbQosCMStatsEntry 17}cbQosCMDropBitRate OBJECT-TYPESYNTAXGauge32UNITS"bits per second"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The bit rate of the drops per class as the result of
all features that can produce drops
(e.g., police, random detect, etc.)."::={ cbQosCMStatsEntry 18}cbQosCMNoBufDropPktOverflow OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The upper 32 bits drop packet count which occured
due to a lack of SRAM buffers during output processing
on an interface."::={ cbQosCMStatsEntry 19}cbQosCMNoBufDropPkt OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The lower 32 bits drop packet count which occured due
to a lack of SRAM buffers during output processing on
an interface."::={ cbQosCMStatsEntry 20}cbQosCMNoBufDropPkt64 OBJECT-TYPESYNTAXCounter64MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits drop packet count which occured due to a
lack of SRAM buffers during output processing on an
interface."::={ cbQosCMStatsEntry 21}-- End of cbQosCMStats group
----
-- QoS Match Statement Object Stats TablecbQosMatchStmtStatsTable OBJECT-TYPESYNTAXSEQUENCEOF CbQosMatchStmtStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table specifies Match Statement related statistical
information."::={ cbQosMatchStmtStats 1}cbQosMatchStmtStatsEntry OBJECT-TYPESYNTAX CbQosMatchStmtStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry in this table describes the statistical
information about Match Statement. Match Statement specific
information you can find in this table are :
Pre policy pkt/byte counters, and bit rates.
This table contains statistical information only,
no configuration information associated with it. Therefore,
it is indexed by the instance specific IDs, such as
cbQosPolicyIndex and cbQosObjectsIndex."INDEX{
cbQosPolicyIndex,
cbQosObjectsIndex
}::={ cbQosMatchStmtStatsTable 1}
CbQosMatchStmtStatsEntry ::=SEQUENCE{
cbQosMatchPrePolicyPktOverflow Counter32,
cbQosMatchPrePolicyPkt Counter32,
cbQosMatchPrePolicyPkt64 Counter64,
cbQosMatchPrePolicyByteOverflow Counter32,
cbQosMatchPrePolicyByte Counter32,
cbQosMatchPrePolicyByte64 Counter64,
cbQosMatchPrePolicyBitRate Gauge32}cbQosMatchPrePolicyPktOverflow OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The upper 32 bits count of inbound packets prior to
executing any QoS policies."::={ cbQosMatchStmtStatsEntry 1}cbQosMatchPrePolicyPkt OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The lower 32 bits count of inbound packets prior to
executing any QoS policies."::={ cbQosMatchStmtStatsEntry 2}cbQosMatchPrePolicyPkt64 OBJECT-TYPESYNTAXCounter64MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of inbound packets prior to executing
any QoS policies."::={ cbQosMatchStmtStatsEntry 3}cbQosMatchPrePolicyByteOverflow OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The upper 32 bits count of inbound octets prior to
executing any QoS policies."::={ cbQosMatchStmtStatsEntry 4}cbQosMatchPrePolicyByte OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The lower 32 bits count of inbound octets prior to
executing any QoS policies."::={ cbQosMatchStmtStatsEntry 5}cbQosMatchPrePolicyByte64 OBJECT-TYPESYNTAXCounter64MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of inbound octets prior to executing
any QoS policies."::={ cbQosMatchStmtStatsEntry 6}cbQosMatchPrePolicyBitRate OBJECT-TYPESYNTAXGauge32
UNITS"bits per second"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The bit rate of the traffic prior to executing any QoS
policies."::={ cbQosMatchStmtStatsEntry 7}-- The cbQosPoliceStats group
--
-- cbQosPoliceStatsTablecbQosPoliceStatsTable OBJECT-TYPESYNTAXSEQUENCEOF CbQosPoliceStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table specifies Police Action related Statistical
information."::={ cbQosPoliceStats 1}cbQosPoliceStatsEntry OBJECT-TYPESYNTAX CbQosPoliceStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry in this table describes the statistical
information about Police Action. Police Action specific
information you can find in this table are :
Conformed/Exceeded pkt/byte counters, bit rates.
This table contains statistical information only,
no configuration information associated with it.
Therefore, it is indexed by the instance specific IDs,
such as cbQosPolicyIndex and cbQosObjectsIndex."INDEX{
cbQosPolicyIndex,
cbQosObjectsIndex
}::={ cbQosPoliceStatsTable 1}
CbQosPoliceStatsEntry ::=SEQUENCE{
cbQosPoliceConformedPktOverflow Counter32,
cbQosPoliceConformedPkt Counter32,
cbQosPoliceConformedPkt64 Counter64,
cbQosPoliceConformedByteOverflow Counter32,
cbQosPoliceConformedByte Counter32,
cbQosPoliceConformedByte64 Counter64,
cbQosPoliceConformedBitRate Gauge32,
cbQosPoliceExceededPktOverflow Counter32,
cbQosPoliceExceededPkt Counter32,
cbQosPoliceExceededPkt64 Counter64,
cbQosPoliceExceededByteOverflow Counter32,
cbQosPoliceExceededByte Counter32,
cbQosPoliceExceededByte64 Counter64,
cbQosPoliceExceededBitRate Gauge32,
cbQosPoliceViolatedPktOverflow Counter32,
cbQosPoliceViolatedPkt Counter32,
cbQosPoliceViolatedPkt64 Counter64,
cbQosPoliceViolatedByteOverflow Counter32,
cbQosPoliceViolatedByte Counter32,
cbQosPoliceViolatedByte64 Counter64,
cbQosPoliceViolatedBitRate Gauge32}cbQosPoliceConformedPktOverflow OBJECT-TYPESYNTAXCounter32UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The upper 32 bits count of packets treated as
conforming by the policing feature."::={ cbQosPoliceStatsEntry 1}cbQosPoliceConformedPkt OBJECT-TYPESYNTAXCounter32UNITS"Packets"MAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"The lower 32 bits count of packets treated as
conforming by the policing feature."::={ cbQosPoliceStatsEntry 2}cbQosPoliceConformedPkt64 OBJECT-TYPESYNTAXCounter64UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of packets treated as conforming
by the policing feature."::={ cbQosPoliceStatsEntry 3}cbQosPoliceConformedByteOverflow OBJECT-TYPESYNTAXCounter32UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The upper 32 bits count of octets treated as
conforming by the policing feature."::={ cbQosPoliceStatsEntry 4}cbQosPoliceConformedByte OBJECT-TYPESYNTAXCounter32UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The lower 32 bits count of octets treated as
conforming by the policing feature."::={ cbQosPoliceStatsEntry 5}cbQosPoliceConformedByte64 OBJECT-TYPESYNTAXCounter64UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of octets treated as conforming
by the policing feature."::={ cbQosPoliceStatsEntry 6}cbQosPoliceConformedBitRate OBJECT-TYPESYNTAXGauge32UNITS"bits per second"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The bit rate of conforming traffic."::={ cbQosPoliceStatsEntry 7}cbQosPoliceExceededPktOverflow OBJECT-TYPESYNTAXCounter32UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The upper 32 bits count of packets treated as
non-conforming by the policing feature."::={ cbQosPoliceStatsEntry 8}cbQosPoliceExceededPkt OBJECT-TYPESYNTAXCounter32UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 32 bits count of packets treated as
non-conforming by the policing feature."::={ cbQosPoliceStatsEntry 9}cbQosPoliceExceededPkt64 OBJECT-TYPESYNTAXCounter64UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of packets treated as
non-conforming by the policing feature."::={ cbQosPoliceStatsEntry 10}
cbQosPoliceExceededByteOverflow OBJECT-TYPESYNTAXCounter32UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The upper 32 bits count of octets treated as
non-conforming by the policing feature."::={ cbQosPoliceStatsEntry 11}cbQosPoliceExceededByte OBJECT-TYPESYNTAXCounter32UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The lower 32 bits count of octets treated as
non-conforming by the policing feature."::={ cbQosPoliceStatsEntry 12}cbQosPoliceExceededByte64 OBJECT-TYPESYNTAXCounter64UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of octets treated as
non-conforming by the policing feature."::={ cbQosPoliceStatsEntry 13}cbQosPoliceExceededBitRate OBJECT-TYPESYNTAXGauge32UNITS"bits per second"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The bit rate of the non-conforming traffic."::={ cbQosPoliceStatsEntry 14}cbQosPoliceViolatedPktOverflow OBJECT-TYPESYNTAXCounter32UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The upper 32 bits count of packets treated as
violated by the policing feature."::={ cbQosPoliceStatsEntry 15}cbQosPoliceViolatedPkt OBJECT-TYPESYNTAXCounter32UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 32 bits count of packets treated as
violated by the policing feature."::={ cbQosPoliceStatsEntry 16}cbQosPoliceViolatedPkt64 OBJECT-TYPESYNTAXCounter64UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of packets treated as
violated by the policing feature."::={ cbQosPoliceStatsEntry 17}cbQosPoliceViolatedByteOverflow OBJECT-TYPESYNTAXCounter32UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The upper 32 bits count of octets treated as
violated by the policing feature."::={ cbQosPoliceStatsEntry 18}cbQosPoliceViolatedByte OBJECT-TYPESYNTAXCounter32UNITS"Octets"
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The lower 32 bits count of octets treated as
violated by the policing feature."::={ cbQosPoliceStatsEntry 19}cbQosPoliceViolatedByte64 OBJECT-TYPESYNTAXCounter64UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of octets treated as
violated by the policing feature."::={ cbQosPoliceStatsEntry 20}cbQosPoliceViolatedBitRate OBJECT-TYPESYNTAXGauge32UNITS"bits per second"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The bit rate of the violating traffic."::={ cbQosPoliceStatsEntry 21}-- end of cbQosPoliceStatsTable
----
-- The cbQosQueueingStats groupcbQosQueueingStatsTable OBJECT-TYPESYNTAXSEQUENCEOF CbQosQueueingStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table specifies Queueing Action related Statistical
information."::={ cbQosQueueingStats 1}cbQosQueueingStatsEntry OBJECT-TYPESYNTAX CbQosQueueingStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry in this table describes the statistical
information about queueing action. Queueing action specific
information you can find in this table are :
various Q depth, and discard pkt/byte counters.
This table contains statistical information only,
no configuration information associated with it.
Therefore, it is indexed by the instance specific IDs,
such as cbQosPolicyIndex and cbQosObjectsIndex."INDEX{
cbQosPolicyIndex,
cbQosObjectsIndex
}::={ cbQosQueueingStatsTable 1}
CbQosQueueingStatsEntry ::=SEQUENCE{
cbQosQueueingCurrentQDepth Gauge32,
cbQosQueueingMaxQDepth Gauge32,
cbQosQueueingDiscardByteOverflow Counter32,
cbQosQueueingDiscardByte Counter32,
cbQosQueueingDiscardByte64 Counter64,
cbQosQueueingDiscardPktOverflow Counter32,
cbQosQueueingDiscardPkt Counter32,
cbQosQueueingDiscardPkt64 Counter64}cbQosQueueingCurrentQDepth OBJECT-TYPESYNTAXGauge32UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The current depth of the queue."::={ cbQosQueueingStatsEntry 1}cbQosQueueingMaxQDepth OBJECT-TYPESYNTAXGauge32UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION
"The maximum depth of the queue."::={ cbQosQueueingStatsEntry 2}cbQosQueueingDiscardByteOverflow OBJECT-TYPESYNTAXCounter32UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The upper 32 bit count of octets, associated with
this class, that were dropped by queueing."::={ cbQosQueueingStatsEntry 3}cbQosQueueingDiscardByte OBJECT-TYPESYNTAXCounter32UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The lower 32 bits count of octets, associated with
this class, that were dropped by queueing."::={ cbQosQueueingStatsEntry 4}cbQosQueueingDiscardByte64 OBJECT-TYPESYNTAXCounter64UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The count of octets, associated with this class,
that were dropped by queueing."::={ cbQosQueueingStatsEntry 5}cbQosQueueingDiscardPktOverflow OBJECT-TYPESYNTAXCounter32UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The upper 32 bits count of packets, associated with
this class, that were dropped by queueing."::={ cbQosQueueingStatsEntry 6}cbQosQueueingDiscardPkt OBJECT-TYPESYNTAXCounter32UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of packets, associated with this class,
that were dropped by queueing."::={ cbQosQueueingStatsEntry 7}cbQosQueueingDiscardPkt64 OBJECT-TYPESYNTAXCounter64UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of packets, associated with this class,
that were dropped by queueing."::={ cbQosQueueingStatsEntry 8}-- end of cbQosQueueingStats Group
---- cbQosTSStats GroupcbQosTSStatsTable OBJECT-TYPESYNTAXSEQUENCEOF CbQosTSStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table specifies traffic-shaping Action related
Statistical information."::={ cbQosTSStats 1}cbQosTSStatsEntry OBJECT-TYPESYNTAX CbQosTSStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry in this table describes the statistical
information about traffic-shaping Action. Traffic-shaping
Action specific information you can find in this table are :
various delay/drop pkt/byte counters, state of feature,
and Q size.
This table contains statistical information only,
no configuration information associated with it.
Therefore, it is indexed by the instance specific IDs,
such as cbQosPolicyIndex and cbQosObjectsIndex."INDEX{
cbQosPolicyIndex,
cbQosObjectsIndex
}::={ cbQosTSStatsTable 1}
CbQosTSStatsEntry ::=SEQUENCE{
cbQosTSStatsDelayedByteOverflow Counter32,
cbQosTSStatsDelayedByte Counter32,
cbQosTSStatsDelayedByte64 Counter64,
cbQosTSStatsDelayedPktOverflow Counter32,
cbQosTSStatsDelayedPkt Counter32,
cbQosTSStatsDelayedPkt64 Counter64,
cbQosTSStatsDropByteOverflow Counter32,
cbQosTSStatsDropByte Counter32,
cbQosTSStatsDropByte64 Counter64,
cbQosTSStatsDropPktOverflow Counter32,
cbQosTSStatsDropPkt Counter32,
cbQosTSStatsDropPkt64 Counter64,
cbQosTSStatsActive TruthValue,
cbQosTSStatsCurrentQSize Gauge32}cbQosTSStatsDelayedByteOverflow OBJECT-TYPESYNTAXCounter32UNITS"octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object represents the upper 32 bits counter of
octets that have been delayed."::={ cbQosTSStatsEntry 1}cbQosTSStatsDelayedByte OBJECT-TYPESYNTAXCounter32UNITS"octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object represents the lower 32 bits counter of
octets that have been delayed."::={ cbQosTSStatsEntry 2}cbQosTSStatsDelayedByte64 OBJECT-TYPESYNTAXCounter64UNITS"octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object represents the 64 bits counter of
octets that have been delayed."::={ cbQosTSStatsEntry 3}cbQosTSStatsDelayedPktOverflow OBJECT-TYPESYNTAXCounter32UNITS"packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object represents the upper 32 bits counter of
packets that have been delayed."::={ cbQosTSStatsEntry 4}cbQosTSStatsDelayedPkt OBJECT-TYPESYNTAXCounter32UNITS"packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object represents the lower 32 bits counter of
packets that have been delayed."::={ cbQosTSStatsEntry 5}cbQosTSStatsDelayedPkt64 OBJECT-TYPESYNTAXCounter64
UNITS"packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object represents the 64 bits counter of
packets that have been delayed."::={ cbQosTSStatsEntry 6}cbQosTSStatsDropByteOverflow OBJECT-TYPESYNTAXCounter32UNITS"octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object represents the upper 32 bits counter of
octets that have been dropped during shaping."::={ cbQosTSStatsEntry 7}cbQosTSStatsDropByte OBJECT-TYPESYNTAXCounter32UNITS"octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object represents the lower 32 bits counter of
octets that have been dropped during shaping."::={ cbQosTSStatsEntry 8}cbQosTSStatsDropByte64 OBJECT-TYPESYNTAXCounter64UNITS"octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object represents the 64 bits counter of
octets that have been dropped during shaping."::={ cbQosTSStatsEntry 9}cbQosTSStatsDropPktOverflow OBJECT-TYPESYNTAXCounter32UNITS"packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object represents the upper 32 bits counter of
packets that have been dropped during shaping."::={ cbQosTSStatsEntry 10}cbQosTSStatsDropPkt OBJECT-TYPESYNTAXCounter32UNITS"packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object represents the lower 32 bits counter of
packets that have been dropped during shaping."::={ cbQosTSStatsEntry 11}cbQosTSStatsDropPkt64 OBJECT-TYPESYNTAXCounter64UNITS"packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object represents the 64 bits counter of
packets that have been dropped during shaping."::={ cbQosTSStatsEntry 12}cbQosTSStatsActive OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the current traffic-shaping
state. When traffic-shaping is enabled and the traffic
rate exceeds the shape rate, traffic-shaping
is considered to be active. Otherwise, it is
considered inactive."::={ cbQosTSStatsEntry 13}cbQosTSStatsCurrentQSize OBJECT-TYPESYNTAXGauge32UNITS"packets"
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object indicates the current traffic-shaping
queue depth in packets."::={ cbQosTSStatsEntry 14}-- end of cbQosTSStats Group
---- cbQosREDClassStats GroupcbQosREDClassStatsTable OBJECT-TYPESYNTAXSEQUENCEOF CbQosREDClassStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table specifies per Precedence WRED Action related
Statistical information."::={ cbQosREDClassStats 1}cbQosREDClassStatsEntry OBJECT-TYPESYNTAX CbQosREDClassStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry in this table describes the statistical
information about per Precedence WRED Action. per Precedence
WRED Action specific information you can find in this table
are : Random pkt/byte counters, and Tail drop pkt/byte
counters.
This table contains per Precedence/dscp based statistical
information only, no configuration information associated
with it. Therefore, it is indexed by the instance specific
IDs, and a per Precedence identifier:
cbQosPolicyIndex, cbQosObjectsIndex and cbQosREDValue."INDEX{
cbQosPolicyIndex,
cbQosObjectsIndex,
cbQosREDValue
}::={ cbQosREDClassStatsTable 1}
CbQosREDClassStatsEntry ::=SEQUENCE{
cbQosREDRandomDropPktOverflow Counter32,
cbQosREDRandomDropPkt Counter32,
cbQosREDRandomDropPkt64 Counter64,
cbQosREDRandomDropByteOverflow Counter32,
cbQosREDRandomDropByte Counter32,
cbQosREDRandomDropByte64 Counter64,
cbQosREDTailDropPktOverflow Counter32,
cbQosREDTailDropPkt Counter32,
cbQosREDTailDropPkt64 Counter64,
cbQosREDTailDropByteOverflow Counter32,
cbQosREDTailDropByte Counter32,
cbQosREDTailDropByte64 Counter64,
cbQosREDTransmitPktOverflow Counter32,
cbQosREDTransmitPkt Counter32,
cbQosREDTransmitPkt64 Counter64,
cbQosREDTransmitByteOverflow Counter32,
cbQosREDTransmitByte Counter32,
cbQosREDTransmitByte64 Counter64,
cbQosREDECNMarkPktOverflow Counter32,
cbQosREDECNMarkPkt Counter32,
cbQosREDECNMarkPkt64 Counter64,
cbQosREDECNMarkByteOverflow Counter32,
cbQosREDECNMarkByte Counter32,
cbQosREDECNMarkByte64 Counter64,
cbQosREDMeanQSizeUnits CbQosQueueUnitType,
cbQosREDMeanQSize CbQosQueueDepth
}cbQosREDRandomDropPktOverflow OBJECT-TYPESYNTAXCounter32UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The upper 32 bits count of packets dropped when the
number of packets in the associated queue was greater
than the minimum threshold and less than the
maximum threshold."::={ cbQosREDClassStatsEntry 1}cbQosREDRandomDropPkt OBJECT-TYPESYNTAXCounter32UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The lower 32 bits count of packets dropped when
the number of packets in the associated queue was
greater than the minimum threshold and less than the
maximum threshold."::={ cbQosREDClassStatsEntry 2}cbQosREDRandomDropPkt64 OBJECT-TYPESYNTAXCounter64UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of packets dropped when the number
of packets in the associated queue was greater
than the minimum threshold and less than the
maximum threshold."::={ cbQosREDClassStatsEntry 3}cbQosREDRandomDropByteOverflow OBJECT-TYPESYNTAXCounter32UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The upper 32 bits count of bytes dropped when the
number of packets in the associated queue was greater
than the minimum threshold and less than the
maximum threshold."::={ cbQosREDClassStatsEntry 4}cbQosREDRandomDropByte OBJECT-TYPESYNTAXCounter32UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The lower 32 bits count of bytes dropped when
the number of packets in the associated queue was
greater than the minimum threshold and less than the
maximum threshold."::={ cbQosREDClassStatsEntry 5}cbQosREDRandomDropByte64 OBJECT-TYPESYNTAXCounter64UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of bytes dropped when the number of
packets in the associated queue was greater
than the minimum threshold and less than the
maximum threshold."::={ cbQosREDClassStatsEntry 6}cbQosREDTailDropPktOverflow OBJECT-TYPESYNTAXCounter32UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The upper 32 bits count of packets dropped when the
number of packets in the associated queue was greater
than the maximum threshold."::={ cbQosREDClassStatsEntry 7}cbQosREDTailDropPkt OBJECT-TYPESYNTAXCounter32UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The lower 32 bits count of packets dropped when the
number of packets in the associated queue was greater
than the maximum threshold."::={ cbQosREDClassStatsEntry 8}
cbQosREDTailDropPkt64 OBJECT-TYPESYNTAXCounter64UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of packets dropped when the number
of packets in the associated queue was greater
than the maximum threshold."::={ cbQosREDClassStatsEntry 9}cbQosREDTailDropByteOverflow OBJECT-TYPESYNTAXCounter32UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The upper 32 bits count of bytes dropped when the
number of packets in the associated queue was greater
than the maximum threshold."::={ cbQosREDClassStatsEntry 10}cbQosREDTailDropByte OBJECT-TYPESYNTAXCounter32UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The lower 32 bits count of bytes dropped when the
number of packets in the associated queue was greater
than the maximum threshold."::={ cbQosREDClassStatsEntry 11}cbQosREDTailDropByte64 OBJECT-TYPESYNTAXCounter64UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of bytes dropped when the number of
packets in the associated queue was greater
than the maximum threshold."::={ cbQosREDClassStatsEntry 12}cbQosREDTransmitPktOverflow OBJECT-TYPESYNTAXCounter32UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The upper 32 bits count of bytes transmitted."::={ cbQosREDClassStatsEntry 13}cbQosREDTransmitPkt OBJECT-TYPESYNTAXCounter32UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The lower 32 bits count of bytes trasmitted."::={ cbQosREDClassStatsEntry 14}cbQosREDTransmitPkt64 OBJECT-TYPESYNTAXCounter64UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of packets transmitted."::={ cbQosREDClassStatsEntry 15}cbQosREDTransmitByteOverflow OBJECT-TYPESYNTAXCounter32UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The upper 32 bits count of octets transmitted."::={ cbQosREDClassStatsEntry 16}cbQosREDTransmitByte OBJECT-TYPESYNTAXCounter32
UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The lower 32 bits count of octets trasmitted."::={ cbQosREDClassStatsEntry 17}cbQosREDTransmitByte64 OBJECT-TYPESYNTAXCounter64UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of octets transmitted."::={ cbQosREDClassStatsEntry 18}cbQosREDECNMarkPktOverflow OBJECT-TYPESYNTAXCounter32UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The upper 32 bits count of packets ecn marked when the
number of packets in the associated queue was greater
than the minimum threshold and less than the
maximum threshold."::={ cbQosREDClassStatsEntry 19}cbQosREDECNMarkPkt OBJECT-TYPESYNTAXCounter32UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The lower 32 bits count of packets ecn marked when
the number of packets in the associated queue was
greater than the minimum threshold and less than the
maximum threshold."::={ cbQosREDClassStatsEntry 20}cbQosREDECNMarkPkt64 OBJECT-TYPESYNTAXCounter64UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of packets ecn marked when the
number of packets in the associated queue was
greater than the minimum threshold and less than
the maximum threshold."::={ cbQosREDClassStatsEntry 21}cbQosREDECNMarkByteOverflow OBJECT-TYPESYNTAXCounter32UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The upper 32 bits count of bytes ecn marked when
the number of packets in the associated queue was
greater than the minimum threshold and less than the
maximum threshold."::={ cbQosREDClassStatsEntry 22}cbQosREDECNMarkByte OBJECT-TYPESYNTAXCounter32UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The lower 32 bits count of bytes ecn marked when
the number of packets in the associated queue was
greater than the minimum threshold and less than the
maximum threshold."::={ cbQosREDClassStatsEntry 23}cbQosREDECNMarkByte64 OBJECT-TYPESYNTAXCounter64UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of bytes ecn marked when the
number of packets in the associated queue was
greater than the minimum threshold and less than the
maximum threshold."::={ cbQosREDClassStatsEntry 24}cbQosREDMeanQSizeUnits OBJECT-TYPESYNTAX CbQosQueueUnitType
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Represents the unit type of cbQosREDMeanQSize
object."::={ cbQosREDClassStatsEntry 25}cbQosREDMeanQSize OBJECT-TYPESYNTAX CbQosQueueDepth
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The average queue size computed and used by the
WRED algorithm."::={ cbQosREDClassStatsEntry 26}-- end of cbQosREDClassStatsTable
---- Start of cbQosIPHCCfgTablecbQosIPHCCfgTable OBJECT-TYPESYNTAXSEQUENCEOF CbQosIPHCCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table specifies IP Header Compression
configuration information."::={ cbQosIPHCCfg 1}cbQosIPHCCfgEntry OBJECT-TYPESYNTAX CbQosIPHCCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry in this table describes configuration
information about IP Header compression. This
includes the compression option of UDP/RTP header,
TCP header or both.
This table contains configuration information only,
no statistics associated with it. Therefore, it is
indexed by cbQosConfigIndex."INDEX{ cbQosConfigIndex }::={ cbQosIPHCCfgTable 1}
CbQosIPHCCfgEntry ::=SEQUENCE{
cbQosIPHCCfgOption IPHCOption
}cbQosIPHCCfgOption OBJECT-TYPESYNTAX IPHCOption
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The configured IP header compression option.
The value is defined by IPHCOption."::={ cbQosIPHCCfgEntry 1}-- end of cbQosIPHCCfgTable
---- Start of cbQosIPHCStatsTablecbQosIPHCStatsTable OBJECT-TYPESYNTAXSEQUENCEOF CbQosIPHCStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table specifies IP Header Compression
statistical information."::={ cbQosIPHCStats 1}cbQosIPHCStatsEntry OBJECT-TYPESYNTAX CbQosIPHCStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry in this table describes statistical
information about IP Header compression.
This table contains statistical information only,
no configuration information associated with it.
Therefore, it is indexed by the instance specific IDs,
namely cbQosPolicyIndex and cbQosObjectsIndex."INDEX{
cbQosPolicyIndex,
cbQosObjectsIndex
}::={ cbQosIPHCStatsTable 1}
CbQosIPHCStatsEntry ::=SEQUENCE{
cbQosIPHCRtpSentPktOverflow Counter32,
cbQosIPHCRtpSentPkt Counter32,
cbQosIPHCRtpSentPkt64 Counter64,
cbQosIPHCRtpCmprsOutPktOverflow Counter32,
cbQosIPHCRtpCmprsOutPkt Counter32,
cbQosIPHCRtpCmprsOutPkt64 Counter64,
cbQosIPHCRtpSavedByteOverflow Counter32,
cbQosIPHCRtpSavedByte Counter32,
cbQosIPHCRtpSavedByte64 Counter64,
cbQosIPHCRtpSentByteOverflow Counter32,
cbQosIPHCRtpSentByte Counter32,
cbQosIPHCRtpSentByte64 Counter64,
cbQosIPHCRtpSentByteRate Gauge32,
cbQosIPHCTcpSentPktOverflow Counter32,
cbQosIPHCTcpSentPkt Counter32,
cbQosIPHCTcpSentPkt64 Counter64,
cbQosIPHCTcpCmprsOutPktOverflow Counter32,
cbQosIPHCTcpCmprsOutPkt Counter32,
cbQosIPHCTcpCmprsOutPkt64 Counter64,
cbQosIPHCTcpSavedByteOverflow Counter32,
cbQosIPHCTcpSavedByte Counter32,
cbQosIPHCTcpSavedByte64 Counter64,
cbQosIPHCTcpSentByteOverflow Counter32,
cbQosIPHCTcpSentByte Counter32,
cbQosIPHCTcpSentByte64 Counter64,
cbQosIPHCTcpSentByteRate Gauge32}cbQosIPHCRtpSentPktOverflow OBJECT-TYPESYNTAXCounter32UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The upper 32 bits count of outbound UDP/RTP packets."::={ cbQosIPHCStatsEntry 1}cbQosIPHCRtpSentPkt OBJECT-TYPESYNTAXCounter32UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The lower 32 bits count of outbound UDP/RTP packets."::={ cbQosIPHCStatsEntry 2}cbQosIPHCRtpSentPkt64 OBJECT-TYPESYNTAXCounter64UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of outbound UDP/RTP packets."::={ cbQosIPHCStatsEntry 3}cbQosIPHCRtpCmprsOutPktOverflow OBJECT-TYPESYNTAXCounter32UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The upper 32 bits count of outbound compressed
UDP/RTP packets."::={ cbQosIPHCStatsEntry 4}cbQosIPHCRtpCmprsOutPkt OBJECT-TYPESYNTAXCounter32UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The lower 32 bits count of outbound compressed
UDP/RTP packets."::={ cbQosIPHCStatsEntry 5}
cbQosIPHCRtpCmprsOutPkt64 OBJECT-TYPESYNTAXCounter64UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of outbound compressed
UDP/RTP packets."::={ cbQosIPHCStatsEntry 6}cbQosIPHCRtpSavedByteOverflow OBJECT-TYPESYNTAXCounter32UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The upper 32 bits count of UDP/RTP bytes that
saved due to IPHC."::={ cbQosIPHCStatsEntry 7}cbQosIPHCRtpSavedByte OBJECT-TYPESYNTAXCounter32UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The lower 32 bits count of UDP/RTP bytes that
saved due to IPHC."::={ cbQosIPHCStatsEntry 8}cbQosIPHCRtpSavedByte64 OBJECT-TYPESYNTAXCounter64UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of UDP/RTP bytes that saved
due to IPHC."::={ cbQosIPHCStatsEntry 9}cbQosIPHCRtpSentByteOverflow OBJECT-TYPESYNTAXCounter32UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The upper 32 bits count of outbound UDP/RTP
bytes."::={ cbQosIPHCStatsEntry 10}cbQosIPHCRtpSentByte OBJECT-TYPESYNTAXCounter32UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The lower 32 bits count of outbound UDP/RTP
bytes."::={ cbQosIPHCStatsEntry 11}cbQosIPHCRtpSentByte64 OBJECT-TYPESYNTAXCounter64UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of outbound UDP/RTP bytes."::={ cbQosIPHCStatsEntry 12}cbQosIPHCRtpSentByteRate OBJECT-TYPESYNTAXGauge32UNITS"Octets per second"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 32 bits count of outbound UDP/RTP byte rate."::={ cbQosIPHCStatsEntry 13}cbQosIPHCTcpSentPktOverflow OBJECT-TYPESYNTAXCounter32UNITS"Packets"MAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"The upper 32 bits count of outbound TCP packets."::={ cbQosIPHCStatsEntry 14}cbQosIPHCTcpSentPkt OBJECT-TYPESYNTAXCounter32UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The lower 32 bits count of outbound TCP packets."::={ cbQosIPHCStatsEntry 15}cbQosIPHCTcpSentPkt64 OBJECT-TYPESYNTAXCounter64UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of outbound TCP packets."::={ cbQosIPHCStatsEntry 16}cbQosIPHCTcpCmprsOutPktOverflow OBJECT-TYPESYNTAXCounter32UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The upper 32 bits count of outbound compressed
TCP packets."::={ cbQosIPHCStatsEntry 17}cbQosIPHCTcpCmprsOutPkt OBJECT-TYPESYNTAXCounter32UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The lower 32 bits count of outbound compressed
TCP packets."::={ cbQosIPHCStatsEntry 18}cbQosIPHCTcpCmprsOutPkt64 OBJECT-TYPESYNTAXCounter64UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of outbound compressed TCP
packets."::={ cbQosIPHCStatsEntry 19}cbQosIPHCTcpSavedByteOverflow OBJECT-TYPESYNTAXCounter32UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The upper 32 bits count of TCP bytes that saved
due to IPHC."::={ cbQosIPHCStatsEntry 20}cbQosIPHCTcpSavedByte OBJECT-TYPESYNTAXCounter32UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The lower 32 bits count of TCP bytes that saved
due to IPHC."::={ cbQosIPHCStatsEntry 21}cbQosIPHCTcpSavedByte64 OBJECT-TYPESYNTAXCounter64UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of TCP bytes that saved due
to IPHC."::={ cbQosIPHCStatsEntry 22}cbQosIPHCTcpSentByteOverflow OBJECT-TYPESYNTAXCounter32
UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The upper 32 bits count of outbound TCP bytes."::={ cbQosIPHCStatsEntry 23}cbQosIPHCTcpSentByte OBJECT-TYPESYNTAXCounter32UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The lower 32 bits count of outbound TCP bytes."::={ cbQosIPHCStatsEntry 24}cbQosIPHCTcpSentByte64 OBJECT-TYPESYNTAXCounter64UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of outbound TCP bytes."::={ cbQosIPHCStatsEntry 25}cbQosIPHCTcpSentByteRate OBJECT-TYPESYNTAXGauge32UNITS"Octets per second"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 32 bits count of outbound TCP byte rate."::={ cbQosIPHCStatsEntry 26}-- end of cbQosIPHCStatsTable
---- Start of cbQosSetStatsTablecbQosSetStatsTable OBJECT-TYPESYNTAXSEQUENCEOF CbQosSetStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table specifies packet marking statistical
information."::={ cbQosSetStats 1}cbQosSetStatsEntry OBJECT-TYPESYNTAX CbQosSetStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry in this table describes the packets that
marked by each marking type.
This table contains statistical information only,
no configuration information associated with it.
Therefore, it is indexed by the instance specific
IDs, namely cbQosPolicyIndex and cbQosObjectsIndex."INDEX{
cbQosPolicyIndex,
cbQosObjectsIndex
}::={ cbQosSetStatsTable 1}
CbQosSetStatsEntry ::=SEQUENCE{
cbQosSetDscpPkt64 Counter64,
cbQosSetPrecedencePkt64 Counter64,
cbQosSetQosGroupPkt64 Counter64,
cbQosSetFrDePkt64 Counter64,
cbQosSetAtmClpPkt64 Counter64,
cbQosSetL2CosPkt64 Counter64,
cbQosSetMplsExpImpositionPkt64 Counter64,
cbQosSetDiscardClassPkt64 Counter64,
cbQosSetMplsExpTopMostPkt64 Counter64,
cbQosSetSrpPriorityPkt64 Counter64,
cbQosSetFrFecnBecnPkt64 Counter64,
cbQosSetDscpTunnelPkt64 Counter64,
cbQosSetPrecedenceTunnelPkt64 Counter64}cbQosSetDscpPkt64 OBJECT-TYPESYNTAXCounter64
UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of packets whose DSCP field is
marked by Set feature."::={ cbQosSetStatsEntry 1}cbQosSetPrecedencePkt64 OBJECT-TYPESYNTAXCounter64UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of packets whose Precedence field is
marked by Set feature."::={ cbQosSetStatsEntry 2}cbQosSetQosGroupPkt64 OBJECT-TYPESYNTAXCounter64UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of packets whose Qos Group field is
marked by Set feature."::={ cbQosSetStatsEntry 3}cbQosSetFrDePkt64 OBJECT-TYPESYNTAXCounter64UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of packets whose Frame Relay DE Bit
is marked by Set feature."::={ cbQosSetStatsEntry 4}cbQosSetAtmClpPkt64 OBJECT-TYPESYNTAXCounter64UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of packets whose ATM CLP Bit is
marked by Set feature."::={ cbQosSetStatsEntry 5}cbQosSetL2CosPkt64 OBJECT-TYPESYNTAXCounter64UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of packets whose Layer 2 Cos field is
marked by Set feature."::={ cbQosSetStatsEntry 6}cbQosSetMplsExpImpositionPkt64 OBJECT-TYPESYNTAXCounter64UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of packets whose MPLS Experimental
Imposition field is marked by Set feature."::={ cbQosSetStatsEntry 7}cbQosSetDiscardClassPkt64 OBJECT-TYPESYNTAXCounter64UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of packets whose Discard Class field
is marked by Set feature."::={ cbQosSetStatsEntry 8}cbQosSetMplsExpTopMostPkt64 OBJECT-TYPESYNTAXCounter64UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION
"The 64 bits count of packets whose MPLS Experimental
TopMost field is marked by Set feature."::={ cbQosSetStatsEntry 9}cbQosSetSrpPriorityPkt64 OBJECT-TYPESYNTAXCounter64UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of packets whose SRP Priority field
is marked by Set feature."::={ cbQosSetStatsEntry 10}cbQosSetFrFecnBecnPkt64 OBJECT-TYPESYNTAXCounter64UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of packets whose Frame Relay FECN
BECN field is marked by Set feature."::={ cbQosSetStatsEntry 11}cbQosSetDscpTunnelPkt64 OBJECT-TYPESYNTAXCounter64UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of packets whose DSCP Tunnel field is
marked by Set feature."::={ cbQosSetStatsEntry 12}cbQosSetPrecedenceTunnelPkt64 OBJECT-TYPESYNTAXCounter64UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of packets whose Precedence Tunnel
field is marked by Set feature."::={ cbQosSetStatsEntry 13}-- end of cbQosSetStats
----
-- Beginning of cbQosPoliceColorStatscbQosPoliceColorStatsTable OBJECT-TYPESYNTAXSEQUENCEOF CbQosPoliceColorStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table specifies Police Action related Statistical
information for two rate color aware marker."::={ cbQosPoliceColorStats 1}cbQosPoliceColorStatsEntry OBJECT-TYPESYNTAX CbQosPoliceColorStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry in this table describes the statistical
information about Police Action for Two Rate Color
Aware Marker.
This table contains statistical information only,
no configuration information associated with it.
Therefore, it is indexed by the instance specific IDs,
such as cbQosPolicyIndex and cbQosObjectsIndex."INDEX{
cbQosPolicyIndex,
cbQosObjectsIndex
}::={ cbQosPoliceColorStatsTable 1}
CbQosPoliceColorStatsEntry ::=SEQUENCE{
cbQosPoliceCfmColorCfmPkt64 Counter64,
cbQosPoliceCfmColorCfmByte64 Counter64,
cbQosPoliceCfmColorExdPkt64 Counter64,
cbQosPoliceCfmColorExdByte64 Counter64,
cbQosPoliceCfmColorVltPkt64 Counter64,
cbQosPoliceCfmColorVltByte64 Counter64,
cbQosPoliceExdColorExdPkt64 Counter64,
cbQosPoliceExdColorExdByte64 Counter64,
cbQosPoliceExdColorVltPkt64 Counter64,
cbQosPoliceExdColorVltByte64 Counter64,
cbQosPoliceVltColorVltPkt64 Counter64,
cbQosPoliceVltColorVltByte64 Counter64}cbQosPoliceCfmColorCfmPkt64 OBJECT-TYPESYNTAXCounter64UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of packets which are marked as
Conform-Color by previous node and treated as
conforming by the policing feature on this node."::={ cbQosPoliceColorStatsEntry 1}cbQosPoliceCfmColorCfmByte64 OBJECT-TYPESYNTAXCounter64UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of bytes which are marked as
Conform-Color by previous node and treated as
conforming by the policing feature on this node."::={ cbQosPoliceColorStatsEntry 2}cbQosPoliceCfmColorExdPkt64 OBJECT-TYPESYNTAXCounter64UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of packets which are marked as
Conform-Color by previous node and treated as
exceeding by the policing feature on this node."::={ cbQosPoliceColorStatsEntry 3}cbQosPoliceCfmColorExdByte64 OBJECT-TYPESYNTAXCounter64UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of bytes which are marked as
Conform-Color by previous node and treated as
exceeding by the policing feature on this node."::={ cbQosPoliceColorStatsEntry 4}cbQosPoliceCfmColorVltPkt64 OBJECT-TYPESYNTAXCounter64UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of packets which are marked as
Conform-Color by previous node and treated as
violating by the policing feature on this node."::={ cbQosPoliceColorStatsEntry 5}cbQosPoliceCfmColorVltByte64 OBJECT-TYPESYNTAXCounter64UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of bytes which are marked as
Conform-Color by previous node and treated as
violating by the policing feature on this node."::={ cbQosPoliceColorStatsEntry 6}cbQosPoliceExdColorExdPkt64 OBJECT-TYPESYNTAXCounter64UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of packets which are marked as
Exceed-Color by previous node and treated as
exceeding by the policing feature on this node."::={ cbQosPoliceColorStatsEntry 7}cbQosPoliceExdColorExdByte64 OBJECT-TYPESYNTAXCounter64UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of bytes which are marked as
Exceed-Color by previous node and treated as
exceeding by the policing feature on this node."::={ cbQosPoliceColorStatsEntry 8}cbQosPoliceExdColorVltPkt64 OBJECT-TYPESYNTAXCounter64UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of packets which are marked as
Exceed-Color by previous node and treated as
violating by the policing feature on this node."::={ cbQosPoliceColorStatsEntry 9}cbQosPoliceExdColorVltByte64 OBJECT-TYPESYNTAXCounter64UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of bytes which are marked as
Exceed-Color by previous node and treated as
violating by the policing feature on this node."::={ cbQosPoliceColorStatsEntry 10}cbQosPoliceVltColorVltPkt64 OBJECT-TYPESYNTAXCounter64UNITS"Packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of packets which are marked as
Violate-Color by previous node and treated as
violating by the policing feature on this node."::={ cbQosPoliceColorStatsEntry 11}cbQosPoliceVltColorVltByte64 OBJECT-TYPESYNTAXCounter64UNITS"Octets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The 64 bits count of bytes which are marked as
Violate-Color by previous node and treated as
violating by the policing feature on this node."::={ cbQosPoliceColorStatsEntry 12}-- end of cbQosPoliceColorStats
----
-- Beginning of cbQosTableMapCfgcbQosTableMapCfgTable OBJECT-TYPESYNTAXSEQUENCEOF CbQosTableMapCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table specifies Table Map basic configuration
information."::={ cbQosTableMapCfg 1}cbQosTableMapCfgEntry OBJECT-TYPESYNTAX CbQosTableMapCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry in this table describes configuration
information about a tablemap name, behavior and default
value. Each cbQosTableMapCfgName is a unique character
string in QOS. This table contains configuration
information only, no statistics associated with it."INDEX{ cbQosTableMapCfgIndex }::={ cbQosTableMapCfgTable 1}
CbQosTableMapCfgEntry ::=SEQUENCE{
cbQosTableMapCfgIndex Unsigned32,
cbQosTableMapCfgName DisplayString,
cbQosTableMapCfgBehavior INTEGER,
cbQosTableMapCfgDftValue Unsigned32}cbQosTableMapCfgIndex OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An arbitrary (system-assigned) index for tablemap."::={ cbQosTableMapCfgEntry 1}cbQosTableMapCfgName OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Name of the tablemap."::={ cbQosTableMapCfgEntry 2}cbQosTableMapCfgBehavior OBJECT-TYPESYNTAXINTEGER{value(1),copy(2),ignore(3)}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The behavior of a tablemap.
value(1) Always set to-value to be a configurable
default value <0-99> which is defined in
cbQosTableMapCfgDftValue.
copy(2) Always copy from-value to to-value in case
the from-value is not found in the tablemap.
This is the default behavior for a tablemap.
ignore(3) Ignore to set to-value when from-value
is not found in the tablemap."::={ cbQosTableMapCfgEntry 3}cbQosTableMapCfgDftValue OBJECT-TYPESYNTAXUnsigned32(0..99)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The configurable default value used when
cbQosTableMapCfgBehavior is value(1)."::={ cbQosTableMapCfgEntry 4}-- end of cbQosTableMapCfg
----
-- Beginning of cbQosTableMapValueCfgcbQosTableMapValueCfgTable OBJECT-TYPESYNTAXSEQUENCEOF CbQosTableMapValueCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table specifies the from-value to to-value
conversion pairs for a tablemap."::={ cbQosTableMapValueCfg 1}cbQosTableMapValueCfgEntry OBJECT-TYPESYNTAX CbQosTableMapValueCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry in this table specifies a from-value to
to-value conversion pair for a given tablemap.
This table contains configuration information only,
no statistics associated with it."INDEX{
cbQosTableMapCfgIndex,
cbQosTableMapValueCfgFrom
}::={ cbQosTableMapValueCfgTable 1}
CbQosTableMapValueCfgEntry ::=SEQUENCE{
cbQosTableMapValueCfgFrom Unsigned32,
cbQosTableMapValueCfgTo Unsigned32
}cbQosTableMapValueCfgFrom OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This is the from-value in the tablemap. If
cbQosTableMapCfgBehavior equals to either copy(2) or
ignore(3), when the content in the from-type(e.g.,
cbQosTMSetIpDscpFromType) equals to this value, the
value in the to-type(e.g., IpDscp) will be set to
cbQosTableMapValueCfgTo. Each tablemap can configure
multiple from-value/to-value pairs."::={ cbQosTableMapValueCfgEntry 1}cbQosTableMapValueCfgTo OBJECT-TYPESYNTAXUnsigned32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This is the to-value in the tablemap. Its usage is
described in cbQosTableMapValueCfgFrom."::={ cbQosTableMapValueCfgEntry 2}-- end of cbQosTableMapValueCfg
------ Beginning of cbQosTableMapSetCfgcbQosTableMapSetCfgTable OBJECT-TYPESYNTAXSEQUENCEOF CbQosTableMapSetCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table specifies enhanced packet marking
configuration using a pre-defined tablemap."::={ cbQosTableMapSetCfg 1}cbQosTableMapSetCfgEntry OBJECT-TYPESYNTAX CbQosTableMapSetCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry in this table describes configuration
information for an Enhanced Packet Marking Action.
The enhanced packet marking action uses a pre-configured
table-map to do the from-value to to-value conversion.
The packet marking to-type and from-type relationship
can be established by using the table-map.
Following is an example:
cbQosTMSetIpDscpFromType == qosGroup(3)
cbQosTMSetIpDscpMapName == 'MyTableMap',
it means that table-map 'MyTableMap' will be used to
convert the QosGroup value and the converted value will
be used to set IpDSCP.
cbQosConfigIndex is drived directly from
cbQosSetCfgTable to keep the 1-to-1 mapping between
two tables. This table contains configuration
information only, no statistics associated with it."INDEX{ cbQosConfigIndex }::={ cbQosTableMapSetCfgTable 1}
CbQosTableMapSetCfgEntry ::=SEQUENCE{
cbQosTMSetIpDscpFromType CbQosTMSetType,
cbQosTMSetIpDscpMapName DisplayString,
cbQosTMSetIpPrecedenceFromType CbQosTMSetType,
cbQosTMSetIpPrecedenceMapName DisplayString,
cbQosTMSetQosGroupFromType CbQosTMSetType,
cbQosTMSetQosGroupMapName DisplayString,
cbQosTMSetL2CosFromType CbQosTMSetType,
cbQosTMSetL2CosMapName DisplayString,
cbQosTMSetMplsExpImpFromType CbQosTMSetType,
cbQosTMSetMplsExpImpMapName DisplayString,
cbQosTMSetMplsExpTopFromType CbQosTMSetType,
cbQosTMSetMplsExpTopMapName DisplayString}cbQosTMSetIpDscpFromType OBJECT-TYPESYNTAX CbQosTMSetType
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The packet marking type whose value will be converted
to a to-value based on a pre-configured table-map. The
to-value will then be used to set IpDSCP."::={ cbQosTableMapSetCfgEntry 1}
cbQosTMSetIpDscpMapName OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The name of a pre-configured table-map used to convert
and set IpDSCP value."::={ cbQosTableMapSetCfgEntry 2}cbQosTMSetIpPrecedenceFromType OBJECT-TYPESYNTAX CbQosTMSetType
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The packet marking type whose value will be converted
to a to-value based on a pre-configured table-map. The
to-value will then be used to set IpPrecedence."::={ cbQosTableMapSetCfgEntry 3}cbQosTMSetIpPrecedenceMapName OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The name of a pre-configured table-map used to convert
and set IpPrecedence value."::={ cbQosTableMapSetCfgEntry 4}cbQosTMSetQosGroupFromType OBJECT-TYPESYNTAX CbQosTMSetType
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The packet marking type whose value will be converted
to a to-value based on a pre-configured table-map. The
to-value will then be used to set QosGroup."::={ cbQosTableMapSetCfgEntry 5}cbQosTMSetQosGroupMapName OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The name of a pre-configured table-map used to convert
and set QosGroup value."::={ cbQosTableMapSetCfgEntry 6}cbQosTMSetL2CosFromType OBJECT-TYPESYNTAX CbQosTMSetType
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The packet marking type whose value will be converted
to a to-value based on a pre-configured table-map. The
to-value will then be used to set L2Cos."::={ cbQosTableMapSetCfgEntry 7}cbQosTMSetL2CosMapName OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The name of a pre-configured table-map used to convert
and set L2Cos value."::={ cbQosTableMapSetCfgEntry 8}cbQosTMSetMplsExpImpFromType OBJECT-TYPESYNTAX CbQosTMSetType
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The packet marking type whose value will be converted
to a to-value based on a pre-configured table-map. The
to-value will then be used to set MplsExpImposition."::={ cbQosTableMapSetCfgEntry 9}cbQosTMSetMplsExpImpMapName OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The name of a pre-configured table-map used to convert
and set MplsExpImposition value."::={ cbQosTableMapSetCfgEntry 10}cbQosTMSetMplsExpTopFromType OBJECT-TYPESYNTAX CbQosTMSetType
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The packet marking type whose value will be converted
to a to-value based on a pre-configured table-map. The
to-value will then be used to set MplsExpTopMost."::={ cbQosTableMapSetCfgEntry 11}cbQosTMSetMplsExpTopMapName OBJECT-TYPESYNTAXDisplayStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The name of a pre-configured table-map used to convert
and set MplsExpTopMost value."::={ cbQosTableMapSetCfgEntry 12}-- end of cbQosTableMapSetCfg
----
-- Start of cbQosEBCfgTablecbQosEBCfgTable OBJECT-TYPESYNTAXSEQUENCEOF CbQosEBCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table specifies Estimate Bandwidth related
configuration information."::={ cbQosEBCfg 1}cbQosEBCfgEntry OBJECT-TYPESYNTAX CbQosEBCfgEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry in this table describes configuration
information about Estimate Bandwidth. It includes:
drop target, delay target and delay threshold.
This table contains configuration information only.
It is indexed by the cbQosConfigIndex."INDEX{ cbQosConfigIndex }::={ cbQosEBCfgTable 1}
CbQosEBCfgEntry ::=SEQUENCE{
cbQosEBCfgMechanism CbQosEBType,
cbQosEBCfgDropTarget Unsigned32,
cbQosEBCfgDelayTarget Unsigned32,
cbQosEBCfgDelayThreshold Unsigned32}cbQosEBCfgMechanism OBJECT-TYPESYNTAX CbQosEBType
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Bandwidth estimate algorithm type."::={ cbQosEBCfgEntry 1}cbQosEBCfgDropTarget OBJECT-TYPESYNTAXUnsigned32(50..1000000)UNITS"packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"One-in-Number target indicating that no more than
one packet in (this) number will be dropped."::={ cbQosEBCfgEntry 2}cbQosEBCfgDelayTarget OBJECT-TYPESYNTAXUnsigned32(50..1000000)UNITS"packets"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"One-in-Number target indicating that no more than
one packet in (this) number will exceed the delay
threshold specified by cbQosEBCfgDelayThreshold."::={ cbQosEBCfgEntry 3}
cbQosEBCfgDelayThreshold OBJECT-TYPESYNTAXUnsigned32(16..1000)UNITS"millisecond"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The time in milliseconds for the delay threshold."::={ cbQosEBCfgEntry 4}-- End of cbQosEBCfgTable
----
-- Start of cbQosEBStatsTablecbQosEBStatsTable OBJECT-TYPESYNTAXSEQUENCEOF CbQosEBStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"This table specifies Estimate Bandwidth related
statistical information."::={ cbQosEBStats 1}cbQosEBStatsEntry OBJECT-TYPESYNTAX CbQosEBStatsEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each entry in this table describes Estimate Bandwidth
related statistical information."INDEX{
cbQosPolicyIndex,
cbQosObjectsIndex
}::={ cbQosEBStatsTable 1}
CbQosEBStatsEntry ::=SEQUENCE{
cbQosEBStatsCorvilEBValue Gauge32,
cbQosEBStatsCorvilEBStatus TruthValue,
cbQosEBStatsCorvilCTD CbQosEBCtd
}cbQosEBStatsCorvilEBValue OBJECT-TYPESYNTAXGauge32UNITS"kbps"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The current Corvil EB bandwidth value."::={ cbQosEBStatsEntry 1}cbQosEBStatsCorvilEBStatus OBJECT-TYPESYNTAXTruthValueMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Boolean to indicate if Corvil EB is ready.
true - Bandwidth estimate is available.
false - Bandwidth estimate is not available."::={ cbQosEBStatsEntry 2}cbQosEBStatsCorvilCTD OBJECT-TYPESYNTAX CbQosEBCtd
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The Corvil CTD value defined by CbQosEBCtd."::={ cbQosEBStatsEntry 3}-- End of cbQosEBStatsTableciscocbQosMIBCompliances OBJECTIDENTIFIER::={ ciscocbQosMIBConformance 1}ciscocbQosMIBGroups OBJECTIDENTIFIER::={ ciscocbQosMIBConformance 2}-- compliance statementsciscocbQosMIBCompliance MODULE-COMPLIANCESTATUSdeprecatedDESCRIPTION"The compliance statement for entities that implement
class-based QoS on a Cisco router."MODULE-- this moduleMANDATORY-GROUPS{
cbQosServicePolicyGroup,
cbQosObjectsGroup,
cbQosPolicyMapCfgGroup,
cbQosClassMapCfgGroup,
cbQosMatchStmtCfgGroup,
cbQosQueueingCfgGroup,
cbQosREDCfgGroup,
cbQosREDClassCfgGroup,
cbQosPoliceCfgGroup,
cbQosTSCfgGroup,
cbQosSetCfgGroup,
cbQosClassMapStatsGroup,
cbQosMatchStmtStatsGroup,
cbQosPoliceStatsGroup,
cbQosQueueingStatsGroup,
cbQosTSStatsGroup,
cbQosREDClassStatsGroup
}GROUP cbQosInterfacePolicyGroup
DESCRIPTION"This is a optional group of information"GROUP cbQosFrameRelayVCPolicyGroup
DESCRIPTION"This is a optional group of information"GROUP cbQosATMPVCPolicyGroup
DESCRIPTION"This is a optional group of information"GROUP cbQosNoBufferDropGroup
DESCRIPTION"This group is only available for code running on the
7500 platform."GROUP cbQosQueueingDynamicQNumberGroup
DESCRIPTION"This group is only available for code running on the
7200 and/or lower platforms."GROUP cbQosTrafficShapingDelayCountersGroup
DESCRIPTION"This group is only available for code running on the
7200 and/or lower platforms."::={ ciscocbQosMIBCompliances 1}ciscocbQosMIBComplianceRev1 MODULE-COMPLIANCESTATUSdeprecatedDESCRIPTION"The compliance statement for entities that implement
class-based QoS on a Cisco router. This compliance module
deprecates ciscocbQosMIBCompliance."MODULE-- this moduleMANDATORY-GROUPS{
cbQosServicePolicyGroup,
cbQosObjectsGroup,
cbQosPolicyMapCfgGroup,
cbQosClassMapCfgGroup,
cbQosMatchStmtCfgGroup,
cbQosQueueingCfgGroupRev1,
cbQosREDCfgGroupRev1,
cbQosREDClassCfgGroupRev1,
cbQosPoliceCfgGroupRev1,
cbQosTSCfgGroup,
cbQosSetCfgGroup,
cbQosClassMapStatsGroup,
cbQosMatchStmtStatsGroup,
cbQosPoliceStatsGroup,
cbQosQueueingStatsGroup,
cbQosTSStatsGroup,
cbQosREDClassStatsGroup
}GROUP cbQosInterfacePolicyGroup
DESCRIPTION"This is a optional group of information"GROUP cbQosFrameRelayVCPolicyGroup
DESCRIPTION"This is a optional group of information"GROUP cbQosATMPVCPolicyGroup
DESCRIPTION"This is a optional group of information"GROUP cbQosNoBufferDropGroup
DESCRIPTION"This group is only available for code running on the
7500 platform."GROUP cbQosQueueingDynamicQNumberGroup
DESCRIPTION"This group is only available for code running on the
7200 and/or lower platforms."GROUP cbQosTrafficShapingDelayCountersGroup
DESCRIPTION"This group is only available for code running on the
7200 and/or lower platforms."
::={ ciscocbQosMIBCompliances 2}ciscocbQosMIBComplianceRev2 MODULE-COMPLIANCESTATUSdeprecatedDESCRIPTION"The compliance statement for entities that implement
class-based QoS on a Cisco router. This compliance module
deprecates ciscocbQosMIBComplianceRev1."MODULE-- this moduleMANDATORY-GROUPS{
cbQosServicePolicyGroup,
cbQosObjectsGroup,
cbQosPolicyMapCfgGroup,
cbQosClassMapCfgGroup,
cbQosMatchStmtCfgGroup,
cbQosQueueingCfgGroupRev1,
cbQosREDCfgGroupRev1,
cbQosREDClassCfgGroupRev1,
cbQosPoliceCfgGroupRev2,
cbQosTSCfgGroup,
cbQosSetCfgGroupRev1,
cbQosClassMapStatsGroup,
cbQosMatchStmtStatsGroup,
cbQosPoliceStatsGroup,
cbQosQueueingStatsGroup,
cbQosTSStatsGroup,
cbQosREDClassStatsGroup
}GROUP cbQosInterfacePolicyGroup
DESCRIPTION"This is a optional group of information"GROUP cbQosFrameRelayVCPolicyGroup
DESCRIPTION"This is a optional group of information"GROUP cbQosATMPVCPolicyGroup
DESCRIPTION"This is a optional group of information"GROUP cbQosNoBufferDropGroup
DESCRIPTION"This group is only available for code running on the
7500 platform."GROUP cbQosQueueingDynamicQNumberGroup
DESCRIPTION"This group is only available for code running on the
7200 and/or lower platforms."GROUP cbQosREDClassXmitCountersGroup
DESCRIPTION"This group is only available on platforms that
supporting WRED transmit stats."GROUP cbQosREDECNCfgGroup
DESCRIPTION"This group is only available on platforms that
supporting WRED ECN configuration."GROUP cbQosREDClassECNMarkCountersGroup
DESCRIPTION"This group is only available on platforms that
supporting WRED ECN stats."GROUP cbQosAFPoliceStatsGroup
DESCRIPTION"This group is only available on platforms that
supporting POLICE violate action stats."GROUP cbQosPoliceCfgPirGroup
DESCRIPTION"This group is only available on platforms that
supporting police PIR configuration."GROUP cbQosPoliceCfgExtGroup
DESCRIPTION"This group is only available for code running on the
Catalyst 4000 platform."GROUP cbQosPoliceActionCfgGroup
DESCRIPTION"This group is only available on platforms that
supporting multiple POLICE conform/exceed actions."GROUP cbQosAFPoliceViolateCfgGroup
DESCRIPTION"This group is only available on platforms that
supporting multiple POLICE violate actions."GROUP cbQosPoliceCfgPercentGroup
DESCRIPTION"This group is only available on platforms that
supporting police CIR/PIR in percentage."GROUP cbQosTrafficShapingDelayCountersGroup
DESCRIPTION"This group is only available for code running on the
7200 and/or lower platforms."GROUP cbQosTSCfgPercentGroup
DESCRIPTION"This group is only available on platforms that
supporting committed shaping rate in percentage."GROUP cbQosNewSetCfgGroup
DESCRIPTION
"This group is only available on platforms that
supporting SET L2 Cos config."GROUP cbQosSetCfgMplsImpositionGroup
DESCRIPTION"This group is only available on platforms that
supporting SET MPLS Experimental Imposition config."GROUP cbQosSetCfgDiscardClassGroup
DESCRIPTION"This group is only available on platforms that
supporting SET Discard Class config."GROUP cbQosSetCfgMPLSTopMostGroup
DESCRIPTION"This group is only available on platforms that
supporting SET MPLS Experimental Top Most config."GROUP cbQosIPHCCfgGroup
DESCRIPTION"This group is only available on platforms that
supporting IPHC configuration."GROUP cbQosIPHCStatsGroup
DESCRIPTION"This group is only available on platforms that
supporting IPHC stats."::={ ciscocbQosMIBCompliances 3}-- units of conformanceciscocbQosMIBComplianceRev3 MODULE-COMPLIANCESTATUScurrentDESCRIPTION"The compliance statement for entities that implement
class-based QoS on a Cisco router. This compliance module
deprecates ciscocbQosMIBComplianceRev2."MODULE-- this moduleMANDATORY-GROUPS{
cbQosServicePolicyGroupRev1,
cbQosObjectsGroup,
cbQosPolicyMapCfgGroup,
cbQosClassMapCfgGroup,
cbQosMatchStmtCfgGroup,
cbQosQueueingCfgGroupRev1,
cbQosREDDscpCfgGroup,
cbQosREDCfgGroupRev1,
cbQosREDClassCfgGroupRev1,
cbQosPoliceCfgGroupRev2,
cbQosTSCfgGroup,
cbQosSetCfgGroupRev1,
cbQosClassMapStatsGroup,
cbQosMatchStmtStatsGroup,
cbQosPoliceStatsGroup,
cbQosQueueingStatsGroup,
cbQosTSStatsGroup,
cbQosREDClassStatsGroup
}GROUP cbQosInterfacePolicyGroup
DESCRIPTION"This is a optional group of information"GROUP cbQosFrameRelayVCPolicyGroup
DESCRIPTION"This is a optional group of information"GROUP cbQosATMPVCPolicyGroup
DESCRIPTION"This is a optional group of information"GROUP cbQosNoBufferDropGroup
DESCRIPTION"This group is only available for code running on the
7500 platform."GROUP cbQosQueueingDynamicQNumberGroup
DESCRIPTION"This group is only available for code running on the
7200 and/or lower platforms."GROUP cbQosREDClassXmitCountersGroup
DESCRIPTION"This group is only available on platforms that
supporting WRED transmit stats."GROUP cbQosREDECNCfgGroup
DESCRIPTION"This group is only available on platforms that
supporting WRED ECN configuration."GROUP cbQosREDClassECNMarkCountersGroup
DESCRIPTION"This group is only available on platforms that
supporting WRED ECN stats."GROUP cbQosAFPoliceStatsGroup
DESCRIPTION"This group is only available on platforms that
supporting POLICE violate action stats."GROUP cbQosPoliceCfgPirGroup
DESCRIPTION"This group is only available on platforms that
supporting police PIR configuration."GROUP cbQosPoliceCfgExtGroup
DESCRIPTION"This group is only available for code running on the
Catalyst 4000 platform."GROUP cbQosPoliceActionCfgGroup
DESCRIPTION"This group is only available on platforms that
supporting multiple POLICE conform/exceed actions."GROUP cbQosAFPoliceViolateCfgGroup
DESCRIPTION"This group is only available on platforms that
supporting multiple POLICE violate actions."GROUP cbQosPoliceCfgPercentGroup
DESCRIPTION"This group is only available on platforms that
supporting police CIR/PIR in percentage."GROUP cbQosTrafficShapingDelayCountersGroup
DESCRIPTION"This group is only available for code running on the
7200 and/or lower platforms."GROUP cbQosTSCfgPercentGroup
DESCRIPTION"This group is only available on platforms that
supporting committed shaping rate in percentage."GROUP cbQosNewSetCfgGroup
DESCRIPTION"This group is only available on platforms that
supporting SET L2 Cos config."GROUP cbQosSetCfgMplsImpositionGroup
DESCRIPTION"This group is only available on platforms that
supporting SET MPLS Experimental Imposition config."GROUP cbQosSetCfgDiscardClassGroup
DESCRIPTION"This group is only available on platforms that
supporting SET Discard Class config."GROUP cbQosSetCfgMPLSTopMostGroup
DESCRIPTION"This group is only available on platforms that
supporting SET MPLS Experimental Top Most config."GROUP cbQosIPHCCfgGroup
DESCRIPTION"This group is only available on platforms that
supporting IPHC configuration."GROUP cbQosIPHCStatsGroup
DESCRIPTION"This group is only available on platforms that
supporting IPHC stats."GROUP cbQosQueueingCfgQLimitTimeGroup
DESCRIPTION"This group is only available on platforms that
supporting time-based Queue limit configuration."GROUP cbQosREDCfgThresholdTimeGroup
DESCRIPTION"This group is only available on platforms that
supporting time-based RED threshold configuration."GROUP cbQosPoliceCfgCellGroup
DESCRIPTION"This group is only available on platforms that
supporting cell-based Policing Rate and Burst
configuration."GROUP cbQosPoliceCfgTimeGroup
DESCRIPTION"This group is only available on platforms that
supporting time-based Policing Burst configuration."GROUP cbQosPoliceCfgCdvtGroup
DESCRIPTION"This group is only available on platforms that
supporting Policing ATM CDVT configuration."GROUP cbQosPoliceCfgColorGroup
DESCRIPTION"This group is only available on platforms that
supporting Policing Color Aware configuration."GROUP cbQosTSCfgTimeGroup
DESCRIPTION"This group is only available on platforms that
supporting time-based Shaping Burst configuration."GROUP cbQosSetCfgSrpPriorityGroup
DESCRIPTION"This group is only available on platforms that
supporting SRP Priority SET configuration."GROUP cbQosSetCfgFrFecnBecnGroup
DESCRIPTION"This group is only available on platforms that
supporting Frame Relay FECN BECN SET configuration."GROUP cbQosSetStatsGroup
DESCRIPTION"This group is only available on platforms that
supporting SET stats."GROUP cbQosPoliceColorStatsGroup
DESCRIPTION"This group is only available on platforms that
supporting Policing Color Aware stats."GROUP cbQosTableMapCfgGroup
DESCRIPTION"This group is only available on platforms that
supporting Enhanced Packet Marking."
GROUP cbQosEBCfgGroup
DESCRIPTION"This group is only available on platforms
supporting Estimate Bandwidth."GROUP cbQosEBStatsGroup
DESCRIPTION"This group is only available on platforms
supporting Estimate Bandwidth stats."::={ ciscocbQosMIBCompliances 4}-- units of conformanceciscocbQosMIBComplianceRev4 MODULE-COMPLIANCESTATUSdeprecatedDESCRIPTION"The compliance statement for entities that implement
class-based QoS on a Cisco router. This compliance module
deprecates ciscocbQosMIBComplianceRev2."MODULE-- this moduleMANDATORY-GROUPS{
cbQosServicePolicyGroupRev1,
cbQosObjectsGroup,
cbQosPolicyMapCfgGroup,
cbQosClassMapCfgGroup,
cbQosMatchStmtCfgGroup,
cbQosQueueingCfgGroupRev1,
cbQosREDDscpCfgGroup,
cbQosREDCfgGroupRev1,
cbQosREDClassCfgGroupRev1,
cbQosPoliceCfgGroupRev2,
cbQosTSCfgGroup,
cbQosSetCfgGroupRev1,
cbQosClassMapStatsGroup,
cbQosMatchStmtStatsGroup,
cbQosPoliceStatsGroup,
cbQosQueueingStatsGroup,
cbQosTSStatsGroup,
cbQosREDClassStatsGroup
}GROUP cbQosInterfacePolicyGroup
DESCRIPTION"This is a optional group of information"GROUP cbQosFrameRelayVCPolicyGroup
DESCRIPTION"This is a optional group of information"GROUP cbQosATMPVCPolicyGroup
DESCRIPTION"This is a optional group of information"GROUP cbQosNoBufferDropGroup
DESCRIPTION"This group is only available for code running on the
7500 platform."GROUP cbQosQueueingDynamicQNumberGroup
DESCRIPTION"This group is only available for code running on the
7200 and/or lower platforms."GROUP cbQosREDClassXmitCountersGroup
DESCRIPTION"This group is only available on platforms that
supporting WRED transmit stats."GROUP cbQosREDECNCfgGroup
DESCRIPTION"This group is only available on platforms that
supporting WRED ECN configuration."GROUP cbQosREDClassECNMarkCountersGroup
DESCRIPTION"This group is only available on platforms that
supporting WRED ECN stats."GROUP cbQosAFPoliceStatsGroup
DESCRIPTION"This group is only available on platforms that
supporting POLICE violate action stats."GROUP cbQosPoliceCfgPirGroup
DESCRIPTION"This group is only available on platforms that
supporting police PIR configuration."GROUP cbQosPoliceCfgExtGroup
DESCRIPTION"This group is only available for code running on the
Catalyst 4000 platform."GROUP cbQosPoliceActionCfgGroup
DESCRIPTION"This group is only available on platforms that
supporting multiple POLICE conform/exceed actions."GROUP cbQosAFPoliceViolateCfgGroup
DESCRIPTION"This group is only available on platforms that
supporting multiple POLICE violate actions."GROUP cbQosPoliceCfgPercentGroup
DESCRIPTION"This group is only available on platforms that
supporting police CIR/PIR in percentage."
GROUP cbQosTrafficShapingDelayCountersGroup
DESCRIPTION"This group is only available for code running on the
7200 and/or lower platforms."GROUP cbQosTSCfgPercentGroup
DESCRIPTION"This group is only available on platforms that
supporting committed shaping rate in percentage."GROUP cbQosNewSetCfgGroup
DESCRIPTION"This group is only available on platforms that
supporting SET L2 Cos config."GROUP cbQosSetCfgMplsImpositionGroup
DESCRIPTION"This group is only available on platforms that
supporting SET MPLS Experimental Imposition config."GROUP cbQosSetCfgDiscardClassGroup
DESCRIPTION"This group is only available on platforms that
supporting SET Discard Class config."GROUP cbQosSetCfgMPLSTopMostGroup
DESCRIPTION"This group is only available on platforms that
supporting SET MPLS Experimental Top Most config."GROUP cbQosIPHCCfgGroup
DESCRIPTION"This group is only available on platforms that
supporting IPHC configuration."GROUP cbQosIPHCStatsGroup
DESCRIPTION"This group is only available on platforms that
supporting IPHC stats."GROUP cbQosQueueingCfgQLimitTimeGroup
DESCRIPTION"This group is only available on platforms that
supporting time-based Queue limit configuration."GROUP cbQosREDCfgThresholdTimeGroup
DESCRIPTION"This group is only available on platforms that
supporting time-based RED threshold configuration."GROUP cbQosPoliceCfgCellGroup
DESCRIPTION"This group is only available on platforms that
supporting cell-based Policing Rate and Burst
configuration."GROUP cbQosPoliceCfgTimeGroup
DESCRIPTION"This group is only available on platforms that
supporting time-based Policing Burst configuration."GROUP cbQosPoliceCfgCdvtGroup
DESCRIPTION"This group is only available on platforms that
supporting Policing ATM CDVT configuration."GROUP cbQosPoliceCfgColorGroup
DESCRIPTION"This group is only available on platforms that
supporting Policing Color Aware configuration."GROUP cbQosTSCfgTimeGroup
DESCRIPTION"This group is only available on platforms that
supporting time-based Shaping Burst configuration."GROUP cbQosSetCfgSrpPriorityGroup
DESCRIPTION"This group is only available on platforms that
supporting SRP Priority SET configuration."GROUP cbQosSetCfgFrFecnBecnGroup
DESCRIPTION"This group is only available on platforms that
supporting Frame Relay FECN BECN SET configuration."GROUP cbQosSetStatsGroup
DESCRIPTION"This group is only available on platforms that
supporting SET stats."GROUP cbQosPoliceColorStatsGroup
DESCRIPTION"This group is only available on platforms that
supporting Policing Color Aware stats."GROUP cbQosTableMapCfgGroup
DESCRIPTION"This group is only available on platforms that
supporting Enhanced Packet Marking."GROUP cbQosEBCfgGroup
DESCRIPTION"This group is only available on platforms
supporting Estimate Bandwidth."GROUP cbQosEBStatsGroup
DESCRIPTION"This group is only available on platforms
supporting Estimate Bandwidth stats."GROUP cbQosMeasureIPSLACfgGroup
DESCRIPTION"Optional objects to configure IPSLA measure action."::={ ciscocbQosMIBCompliances 5}ciscocbQosMIBComplianceRev5 MODULE-COMPLIANCE
STATUSdeprecatedDESCRIPTION"The compliance statement for entities that implement
class-based QoS on a Cisco router. This compliance module
deprecates ciscocbQosMIBComplianceRev4."MODULE-- this moduleMANDATORY-GROUPS{
cbQosServicePolicyGroupRev1,
cbQosObjectsGroup,
cbQosPolicyMapCfgGroup,
cbQosClassMapCfgGroup,
cbQosMatchStmtCfgGroup,
cbQosQueueingCfgGroupRev1,
cbQosREDDscpCfgGroup,
cbQosREDCfgGroupRev1,
cbQosREDClassCfgGroupRev1,
cbQosPoliceCfgGroupRev2,
cbQosTSCfgGroup,
cbQosSetCfgGroupRev1,
cbQosClassMapStatsGroup,
cbQosMatchStmtStatsGroup,
cbQosPoliceStatsGroup,
cbQosQueueingStatsGroup,
cbQosTSStatsGroup,
cbQosREDClassStatsGroup
}GROUP cbQosInterfacePolicyGroup
DESCRIPTION"This is a optional group of information"GROUP cbQosFrameRelayVCPolicyGroup
DESCRIPTION"This is a optional group of information"GROUP cbQosATMPVCPolicyGroup
DESCRIPTION"This is a optional group of information"GROUP cbQosNoBufferDropGroup
DESCRIPTION"This group is only available for code running on the
7500 platform."GROUP cbQosQueueingDynamicQNumberGroup
DESCRIPTION"This group is only available for code running on the
7200 and/or lower platforms."GROUP cbQosREDClassXmitCountersGroup
DESCRIPTION"This group is only available on platforms that
supporting WRED transmit stats."GROUP cbQosREDECNCfgGroup
DESCRIPTION"This group is only available on platforms that
supporting WRED ECN configuration."GROUP cbQosREDClassECNMarkCountersGroup
DESCRIPTION"This group is only available on platforms that
supporting WRED ECN stats."GROUP cbQosAFPoliceStatsGroup
DESCRIPTION"This group is only available on platforms that
supporting POLICE violate action stats."GROUP cbQosPoliceCfgPirGroup
DESCRIPTION"This group is only available on platforms that
supporting police PIR configuration."GROUP cbQosPoliceCfgExtGroup
DESCRIPTION"This group is only available for code running on the
Catalyst 4000 platform."GROUP cbQosPoliceActionCfgGroup
DESCRIPTION"This group is only available on platforms that
supporting multiple POLICE conform/exceed actions."GROUP cbQosAFPoliceViolateCfgGroup
DESCRIPTION"This group is only available on platforms that
supporting multiple POLICE violate actions."GROUP cbQosPoliceCfgPercentGroup
DESCRIPTION"This group is only available on platforms that
supporting police CIR/PIR in percentage."GROUP cbQosTrafficShapingDelayCountersGroup
DESCRIPTION"This group is only available for code running on the
7200 and/or lower platforms."GROUP cbQosTSCfgPercentGroup
DESCRIPTION"This group is only available on platforms that
supporting committed shaping rate in percentage."GROUP cbQosNewSetCfgGroup
DESCRIPTION"This group is only available on platforms that
supporting SET L2 Cos config."
GROUP cbQosSetCfgMplsImpositionGroup
DESCRIPTION"This group is only available on platforms that
supporting SET MPLS Experimental Imposition config."GROUP cbQosSetCfgDiscardClassGroup
DESCRIPTION"This group is only available on platforms that
supporting SET Discard Class config."GROUP cbQosSetCfgMPLSTopMostGroup
DESCRIPTION"This group is only available on platforms that
supporting SET MPLS Experimental Top Most config."GROUP cbQosIPHCCfgGroup
DESCRIPTION"This group is only available on platforms that
supporting IPHC configuration."GROUP cbQosIPHCStatsGroup
DESCRIPTION"This group is only available on platforms that
supporting IPHC stats."GROUP cbQosQueueingCfgQLimitTimeGroup
DESCRIPTION"This group is only available on platforms that
supporting time-based Queue limit configuration."GROUP cbQosREDCfgThresholdTimeGroup
DESCRIPTION"This group is only available on platforms that
supporting time-based RED threshold configuration."GROUP cbQosPoliceCfgCellGroup
DESCRIPTION"This group is only available on platforms that
supporting cell-based Policing Rate and Burst
configuration."GROUP cbQosPoliceCfgTimeGroup
DESCRIPTION"This group is only available on platforms that
supporting time-based Policing Burst configuration."GROUP cbQosPoliceCfgCdvtGroup
DESCRIPTION"This group is only available on platforms that
supporting Policing ATM CDVT configuration."GROUP cbQosPoliceCfgColorGroup
DESCRIPTION"This group is only available on platforms that
supporting Policing Color Aware configuration."GROUP cbQosTSCfgTimeGroup
DESCRIPTION"This group is only available on platforms that
supporting time-based Shaping Burst configuration."GROUP cbQosSetCfgSrpPriorityGroup
DESCRIPTION"This group is only available on platforms that
supporting SRP Priority SET configuration."GROUP cbQosSetCfgFrFecnBecnGroup
DESCRIPTION"This group is only available on platforms that
supporting Frame Relay FECN BECN SET configuration."GROUP cbQosSetStatsGroup
DESCRIPTION"This group is only available on platforms that
supporting SET stats."GROUP cbQosPoliceColorStatsGroup
DESCRIPTION"This group is only available on platforms that
supporting Policing Color Aware stats."GROUP cbQosTableMapCfgGroup
DESCRIPTION"This group is only available on platforms that
supporting Enhanced Packet Marking."GROUP cbQosEBCfgGroup
DESCRIPTION"This group is only available on platforms
supporting Estimate Bandwidth."GROUP cbQosEBStatsGroup
DESCRIPTION"This group is only available on platforms
supporting Estimate Bandwidth stats."GROUP cbQosMeasureIPSLACfgGroup
DESCRIPTION"Optional objects to configure IPSLA measure action."GROUP cbQosTSCfgExtGroup
DESCRIPTION"This group is applicable for those platforms that
support shape rate greater than maximum value
reportable by cbQosTSCfgRate."::={ ciscocbQosMIBCompliances 6}-- units of conformancecbQosServicePolicyGroup OBJECT-GROUPOBJECTS{
cbQosIfType,
cbQosPolicyDirection,
cbQosIfIndex,
cbQosFrDLCI,
cbQosAtmVPI,
cbQosAtmVCI
}STATUSdeprecatedDESCRIPTION"Required objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 1}cbQosInterfacePolicyGroup OBJECT-GROUPOBJECTS{ cbQosIFPolicyIndex }STATUScurrentDESCRIPTION"Required objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 2}cbQosFrameRelayVCPolicyGroup OBJECT-GROUPOBJECTS{ cbQosFRPolicyIndex }STATUScurrentDESCRIPTION"Required objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 3}cbQosATMPVCPolicyGroup OBJECT-GROUPOBJECTS{ cbQosATMPolicyIndex }STATUScurrentDESCRIPTION"Required objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 4}cbQosObjectsGroup OBJECT-GROUPOBJECTS{
cbQosConfigIndex,
cbQosObjectsType,
cbQosParentObjectsIndex
}STATUScurrentDESCRIPTION"Required objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 5}cbQosPolicyMapCfgGroup OBJECT-GROUPOBJECTS{
cbQosPolicyMapName,
cbQosPolicyMapDesc
}STATUScurrentDESCRIPTION"Required objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 6}cbQosClassMapCfgGroup OBJECT-GROUPOBJECTS{
cbQosCMName,
cbQosCMDesc,
cbQosCMInfo
}STATUScurrentDESCRIPTION"Required objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 7}cbQosMatchStmtCfgGroup OBJECT-GROUPOBJECTS{
cbQosMatchStmtName,
cbQosMatchStmtInfo
}STATUScurrentDESCRIPTION"Required objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 8}cbQosQueueingCfgGroup OBJECT-GROUPOBJECTS{
cbQosQueueingCfgBandwidth,
cbQosQueueingCfgBandwidthUnits,
cbQosQueueingCfgFlowEnabled,
cbQosQueueingCfgPriorityEnabled,
cbQosQueueingCfgAggregateQSize,
cbQosQueueingCfgIndividualQSize,
cbQosQueueingCfgPrioBurstSize
}STATUSdeprecated
DESCRIPTION"Required objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 9}cbQosREDCfgGroup OBJECT-GROUPOBJECTS{
cbQosREDCfgExponWeight,
cbQosREDCfgMeanQsize
}STATUSdeprecatedDESCRIPTION"Required objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 10}cbQosREDClassCfgGroup OBJECT-GROUPOBJECTS{
cbQosREDCfgMinThreshold,
cbQosREDCfgMaxThreshold,
cbQosREDCfgPktDropProb
}STATUSdeprecatedDESCRIPTION"Required objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 11}cbQosPoliceCfgGroup OBJECT-GROUPOBJECTS{
cbQosPoliceCfgRate,
cbQosPoliceCfgBurstSize,
cbQosPoliceCfgExtBurstSize,
cbQosPoliceCfgConformAction,
cbQosPoliceCfgConformSetValue,
cbQosPoliceCfgExceedAction,
cbQosPoliceCfgExceedSetValue,
cbQosPoliceCfgPir
}STATUSdeprecatedDESCRIPTION"Required objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 12}cbQosTSCfgGroup OBJECT-GROUPOBJECTS{
cbQosTSCfgRate,
cbQosTSCfgBurstSize,
cbQosTSCfgExtBurstSize,
cbQosTSCfgAdaptiveEnabled,
cbQosTSCfgAdaptiveRate,
cbQosTSCfgLimitType
}STATUScurrentDESCRIPTION"Required objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 13}cbQosSetCfgGroup OBJECT-GROUPOBJECTS{
cbQosSetCfgFeature,
cbQosSetCfgIpDSCPValue,
cbQosSetCfgIpPrecedenceValue,
cbQosSetCfgQosGroupValue,
cbQosSetCfgL2CosValue,
cbQosSetCfgMplsExpValue,
cbQosSetCfgDiscardClassValue
}STATUSdeprecatedDESCRIPTION"Required objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 14}cbQosClassMapStatsGroup OBJECT-GROUPOBJECTS{
cbQosCMPrePolicyPktOverflow,
cbQosCMPrePolicyPkt,
cbQosCMPrePolicyPkt64,
cbQosCMPrePolicyByteOverflow,
cbQosCMPrePolicyByte,
cbQosCMPrePolicyByte64,
cbQosCMPrePolicyBitRate,
cbQosCMPostPolicyByteOverflow,
cbQosCMPostPolicyByte,
cbQosCMPostPolicyByte64,
cbQosCMPostPolicyBitRate,
cbQosCMDropPktOverflow,
cbQosCMDropPkt,
cbQosCMDropPkt64,
cbQosCMDropByteOverflow,
cbQosCMDropByte,
cbQosCMDropByte64,
cbQosCMDropBitRate
}STATUScurrentDESCRIPTION"Required objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 15}cbQosNoBufferDropGroup OBJECT-GROUPOBJECTS{
cbQosCMNoBufDropPktOverflow,
cbQosCMNoBufDropPkt,
cbQosCMNoBufDropPkt64
}STATUScurrentDESCRIPTION"Optional objects to provide CB QoS summary statistics."::={ ciscocbQosMIBGroups 16}cbQosQueueingDynamicQNumberGroup OBJECT-GROUPOBJECTS{ cbQosQueueingCfgDynamicQNumber }STATUScurrentDESCRIPTION"Optional objects to provide CB QoS Queueing information."::={ ciscocbQosMIBGroups 17}cbQosTrafficShapingDelayCountersGroup OBJECT-GROUPOBJECTS{
cbQosTSStatsDelayedByteOverflow,
cbQosTSStatsDelayedByte,
cbQosTSStatsDelayedByte64,
cbQosTSStatsDelayedPktOverflow,
cbQosTSStatsDelayedPkt,
cbQosTSStatsDelayedPkt64,
cbQosTSStatsActive
}STATUScurrentDESCRIPTION"Optional objects to provide CB QoS traffic-shaping
information."::={ ciscocbQosMIBGroups 18}cbQosMatchStmtStatsGroup OBJECT-GROUPOBJECTS{
cbQosMatchPrePolicyPktOverflow,
cbQosMatchPrePolicyPkt,
cbQosMatchPrePolicyPkt64,
cbQosMatchPrePolicyByteOverflow,
cbQosMatchPrePolicyByte,
cbQosMatchPrePolicyByte64,
cbQosMatchPrePolicyBitRate
}STATUScurrentDESCRIPTION"Required objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 19}cbQosPoliceStatsGroup OBJECT-GROUPOBJECTS{
cbQosPoliceConformedPktOverflow,
cbQosPoliceConformedPkt,
cbQosPoliceConformedPkt64,
cbQosPoliceConformedByteOverflow,
cbQosPoliceConformedByte,
cbQosPoliceConformedByte64,
cbQosPoliceConformedBitRate,
cbQosPoliceExceededPktOverflow,
cbQosPoliceExceededPkt,
cbQosPoliceExceededPkt64,
cbQosPoliceExceededByteOverflow,
cbQosPoliceExceededByte,
cbQosPoliceExceededByte64,
cbQosPoliceExceededBitRate
}STATUScurrentDESCRIPTION
"Required objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 20}cbQosQueueingStatsGroup OBJECT-GROUPOBJECTS{
cbQosQueueingCurrentQDepth,
cbQosQueueingMaxQDepth,
cbQosQueueingDiscardByteOverflow,
cbQosQueueingDiscardByte,
cbQosQueueingDiscardByte64,
cbQosQueueingDiscardPktOverflow,
cbQosQueueingDiscardPkt,
cbQosQueueingDiscardPkt64
}STATUScurrentDESCRIPTION"Required objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 21}cbQosTSStatsGroup OBJECT-GROUPOBJECTS{
cbQosTSStatsDropByteOverflow,
cbQosTSStatsDropByte,
cbQosTSStatsDropByte64,
cbQosTSStatsDropPktOverflow,
cbQosTSStatsDropPkt,
cbQosTSStatsDropPkt64,
cbQosTSStatsCurrentQSize
}STATUScurrentDESCRIPTION"Required objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 22}cbQosREDClassStatsGroup OBJECT-GROUPOBJECTS{
cbQosREDRandomDropPktOverflow,
cbQosREDRandomDropPkt,
cbQosREDRandomDropPkt64,
cbQosREDRandomDropByteOverflow,
cbQosREDRandomDropByte,
cbQosREDRandomDropByte64,
cbQosREDTailDropPktOverflow,
cbQosREDTailDropPkt,
cbQosREDTailDropPkt64,
cbQosREDTailDropByteOverflow,
cbQosREDTailDropByte,
cbQosREDTailDropByte64,
cbQosREDMeanQSizeUnits,
cbQosREDMeanQSize
}STATUScurrentDESCRIPTION"Required objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 23}cbQosREDClassXmitCountersGroup OBJECT-GROUPOBJECTS{
cbQosREDTransmitPktOverflow,
cbQosREDTransmitPkt,
cbQosREDTransmitPkt64,
cbQosREDTransmitByteOverflow,
cbQosREDTransmitByte,
cbQosREDTransmitByte64
}STATUScurrentDESCRIPTION"Optional objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 24}cbQosAFPoliceStatsGroup OBJECT-GROUPOBJECTS{
cbQosPoliceViolatedPktOverflow,
cbQosPoliceViolatedPkt,
cbQosPoliceViolatedPkt64,
cbQosPoliceViolatedByteOverflow,
cbQosPoliceViolatedByte,
cbQosPoliceViolatedByte64,
cbQosPoliceViolatedBitRate
}STATUScurrent
DESCRIPTION"Optional objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 25}cbQosAFPoliceCfgGroup OBJECT-GROUPOBJECTS{
cbQosPoliceCfgViolateAction,
cbQosPoliceCfgViolateSetValue
}STATUSdeprecatedDESCRIPTION"Optional objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 26}cbQosREDDscpCfgGroup OBJECT-GROUPOBJECTS{ cbQosREDCfgDscpPrec }STATUScurrentDESCRIPTION"Required objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 27}cbQosNewSetCfgGroup OBJECT-GROUPOBJECTS{ cbQosSetCfgL2CosValue }STATUScurrentDESCRIPTION"Optional objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 28}cbQosQueueingCfgGroupRev1 OBJECT-GROUPOBJECTS{
cbQosQueueingCfgBandwidth,
cbQosQueueingCfgBandwidthUnits,
cbQosQueueingCfgFlowEnabled,
cbQosQueueingCfgPriorityEnabled,
cbQosQueueingCfgIndividualQSize,
cbQosQueueingCfgPrioBurstSize,
cbQosQueueingCfgQLimitUnits,
cbQosQueueingCfgAggregateQLimit
}STATUScurrentDESCRIPTION"Required objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 29}cbQosREDCfgGroupRev1 OBJECT-GROUPOBJECTS{ cbQosREDCfgExponWeight }STATUScurrentDESCRIPTION"Required objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 30}cbQosREDClassCfgGroupRev1 OBJECT-GROUPOBJECTS{
cbQosREDCfgPktDropProb,
cbQosREDClassCfgThresholdUnit,
cbQosREDClassCfgMinThreshold,
cbQosREDClassCfgMaxThreshold
}STATUScurrentDESCRIPTION"Required objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 31}cbQosPoliceCfgGroupRev1 OBJECT-GROUPOBJECTS{
cbQosPoliceCfgRate,
cbQosPoliceCfgBurstSize,
cbQosPoliceCfgExtBurstSize,
cbQosPoliceCfgPir
}STATUSdeprecatedDESCRIPTION"Required objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 32}cbQosPoliceActionCfgGroup OBJECT-GROUPOBJECTS{
cbQosPoliceActionCfgConform,
cbQosPoliceActionCfgConformSetValue,
cbQosPoliceActionCfgExceed,
cbQosPoliceActionCfgExceedSetValue
}STATUScurrentDESCRIPTION"Required objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 33}cbQosAFPoliceViolateCfgGroup OBJECT-GROUPOBJECTS{
cbQosPoliceActionCfgViolate,
cbQosPoliceActionCfgViolateSetValue
}STATUScurrentDESCRIPTION"Optional objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 34}cbQosREDECNCfgGroup OBJECT-GROUPOBJECTS{ cbQosREDCfgECNEnabled }STATUScurrentDESCRIPTION"Optional objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 35}cbQosREDClassECNMarkCountersGroup OBJECT-GROUPOBJECTS{
cbQosREDECNMarkPktOverflow,
cbQosREDECNMarkPkt,
cbQosREDECNMarkPkt64,
cbQosREDECNMarkByteOverflow,
cbQosREDECNMarkByte,
cbQosREDECNMarkByte64
}STATUScurrentDESCRIPTION"Optional objects to provide CB QoS objects configuration
information."::={ ciscocbQosMIBGroups 36}cbQosPoliceCfgExtGroup OBJECT-GROUPOBJECTS{ cbQosPoliceCfgRate64 }STATUScurrentDESCRIPTION"Optional objects to provide the information of the
committed policing rate that is greater than the
maximum value reportable by cbQosPoliceCfgRate."::={ ciscocbQosMIBGroups 37}cbQosSetCfgGroupRev1 OBJECT-GROUPOBJECTS{
cbQosSetCfgFeature,
cbQosSetCfgIpDSCPValue,
cbQosSetCfgIpPrecedenceValue,
cbQosSetCfgQosGroupValue
}STATUScurrentDESCRIPTION"Required objects to provide CB QoS objects configuration
information for SET/Marking feature."::={ ciscocbQosMIBGroups 38}cbQosSetCfgMplsImpositionGroup OBJECT-GROUPOBJECTS{ cbQosSetCfgMplsExpValue }STATUScurrentDESCRIPTION"Optional object to provide CB QoS objects configuration
information for SET/Marking feature."::={ ciscocbQosMIBGroups 39}cbQosSetCfgDiscardClassGroup OBJECT-GROUPOBJECTS{ cbQosSetCfgDiscardClassValue }STATUScurrentDESCRIPTION"Optional object to provide CB QoS objects configuration
information for SET/Marking feature."::={ ciscocbQosMIBGroups 40}cbQosSetCfgMPLSTopMostGroup OBJECT-GROUPOBJECTS{ cbQosSetCfgMplsExpTopMostValue }
STATUScurrentDESCRIPTION"Optional object to provide CB QoS objects configuration
information for SET/Marking feature."::={ ciscocbQosMIBGroups 41}cbQosPoliceCfgGroupRev2 OBJECT-GROUPOBJECTS{
cbQosPoliceCfgRate,
cbQosPoliceCfgBurstSize,
cbQosPoliceCfgExtBurstSize
}STATUScurrentDESCRIPTION"Required objects to provide CB QoS objects configuration
information for POLICE feature."::={ ciscocbQosMIBGroups 42}cbQosPoliceCfgPirGroup OBJECT-GROUPOBJECTS{ cbQosPoliceCfgPir }STATUScurrentDESCRIPTION"Optional objects to provide CB QoS policing PIR rate."::={ ciscocbQosMIBGroups 43}cbQosPoliceCfgPercentGroup OBJECT-GROUPOBJECTS{
cbQosPoliceCfgRateType,
cbQosPoliceCfgPercentRateValue,
cbQosPoliceCfgPercentPirValue
}STATUScurrentDESCRIPTION"Optional objects to provide CB QoS policing CIR and PIR
rates in percentage."::={ ciscocbQosMIBGroups 44}cbQosTSCfgPercentGroup OBJECT-GROUPOBJECTS{
cbQosTSCfgRateType,
cbQosTSCfgPercentRateValue
}STATUScurrentDESCRIPTION"Optional objects to provide CB QoS committed
traffic-shaping rate in percentage."::={ ciscocbQosMIBGroups 45}cbQosIPHCCfgGroup OBJECT-GROUPOBJECTS{ cbQosIPHCCfgOption }STATUScurrentDESCRIPTION"Optional object to provide CB QoS IP header compression
configuration information."::={ ciscocbQosMIBGroups 46}cbQosIPHCStatsGroup OBJECT-GROUPOBJECTS{
cbQosIPHCRtpSentPktOverflow,
cbQosIPHCRtpSentPkt,
cbQosIPHCRtpSentPkt64,
cbQosIPHCRtpCmprsOutPktOverflow,
cbQosIPHCRtpCmprsOutPkt,
cbQosIPHCRtpCmprsOutPkt64,
cbQosIPHCRtpSavedByteOverflow,
cbQosIPHCRtpSavedByte,
cbQosIPHCRtpSavedByte64,
cbQosIPHCRtpSentByteOverflow,
cbQosIPHCRtpSentByte,
cbQosIPHCRtpSentByte64,
cbQosIPHCRtpSentByteRate,
cbQosIPHCTcpSentPktOverflow,
cbQosIPHCTcpSentPkt,
cbQosIPHCTcpSentPkt64,
cbQosIPHCTcpCmprsOutPktOverflow,
cbQosIPHCTcpCmprsOutPkt,
cbQosIPHCTcpCmprsOutPkt64,
cbQosIPHCTcpSavedByteOverflow,
cbQosIPHCTcpSavedByte,
cbQosIPHCTcpSavedByte64,
cbQosIPHCTcpSentByteOverflow,
cbQosIPHCTcpSentByte,
cbQosIPHCTcpSentByte64,
cbQosIPHCTcpSentByteRate
}STATUScurrentDESCRIPTION"Optional objects to provide CB QoS IP header compression
statistic information."::={ ciscocbQosMIBGroups 47}cbQosServicePolicyGroupRev1 OBJECT-GROUPOBJECTS{
cbQosIfType,
cbQosPolicyDirection,
cbQosIfIndex,
cbQosFrDLCI,
cbQosAtmVPI,
cbQosAtmVCI,
cbQosEntityIndex
}STATUScurrentDESCRIPTION"Required objects to provide CB QoS objects configuration
information. This group deprecates
cbQosServicePolicyGroup."::={ ciscocbQosMIBGroups 48}cbQosQueueingCfgQLimitTimeGroup OBJECT-GROUPOBJECTS{ cbQosQueueingCfgAggrQLimitTime }STATUScurrentDESCRIPTION"Optional object to provide Aggregate Queue time based
Limit configuration information."::={ ciscocbQosMIBGroups 49}cbQosREDCfgThresholdTimeGroup OBJECT-GROUPOBJECTS{
cbQosREDClassCfgMinThresholdTime,
cbQosREDClassCfgMaxThresholdTime
}STATUScurrentDESCRIPTION"Optional objects to provide WRED time based threshold
Limit configuration information."::={ ciscocbQosMIBGroups 50}cbQosPoliceCfgCellGroup OBJECT-GROUPOBJECTS{
cbQosPoliceCfgCellRate,
cbQosPoliceCfgCellPir,
cbQosPoliceCfgBurstCell,
cbQosPoliceCfgExtBurstCell
}STATUScurrentDESCRIPTION"Optional objects to provide CB QoS policing cell based
rate configuration information."::={ ciscocbQosMIBGroups 51}cbQosPoliceCfgTimeGroup OBJECT-GROUPOBJECTS{
cbQosPoliceCfgBurstTime,
cbQosPoliceCfgExtBurstTime
}STATUScurrentDESCRIPTION"Optional objects to provide CB QoS policing time based
burst size configuration information."::={ ciscocbQosMIBGroups 52}cbQosPoliceCfgCdvtGroup OBJECT-GROUPOBJECTS{ cbQosPoliceCfgCdvt }STATUScurrentDESCRIPTION"Optional objects to provide CB QoS policing ATM CDVT
configuration information."::={ ciscocbQosMIBGroups 53}cbQosPoliceCfgColorGroup OBJECT-GROUPOBJECTS{
cbQosPoliceCfgConformColor,
cbQosPoliceCfgExceedColor
}STATUScurrentDESCRIPTION"Optional objects to provide CB QoS policing color aware
configuration information."::={ ciscocbQosMIBGroups 54}cbQosTSCfgTimeGroup OBJECT-GROUPOBJECTS{
cbQosTSCfgBurstTime,
cbQosTSCfgExtBurstTime
}STATUScurrentDESCRIPTION"Optional objects to provide CB QoS traffic-shaping
time based burst size configuration information."::={ ciscocbQosMIBGroups 55}cbQosSetCfgSrpPriorityGroup OBJECT-GROUPOBJECTS{ cbQosSetCfgSrpPriority }STATUScurrentDESCRIPTION"Optional object to provide CB QoS SET SRP Priority
configuration information."::={ ciscocbQosMIBGroups 56}cbQosSetCfgFrFecnBecnGroup OBJECT-GROUPOBJECTS{ cbQosSetCfgFrFecnBecn }STATUScurrentDESCRIPTION"Optional object to provide CB QoS SET Frame Relay
FECN BECN configuration information."::={ ciscocbQosMIBGroups 57}cbQosSetStatsGroup OBJECT-GROUPOBJECTS{
cbQosSetDscpPkt64,
cbQosSetPrecedencePkt64,
cbQosSetQosGroupPkt64,
cbQosSetFrDePkt64,
cbQosSetAtmClpPkt64,
cbQosSetL2CosPkt64,
cbQosSetMplsExpImpositionPkt64,
cbQosSetDiscardClassPkt64,
cbQosSetMplsExpTopMostPkt64,
cbQosSetSrpPriorityPkt64,
cbQosSetFrFecnBecnPkt64,
cbQosSetDscpTunnelPkt64,
cbQosSetPrecedenceTunnelPkt64
}STATUScurrentDESCRIPTION"Optional objects to provide CB QoS SET statistical
information."::={ ciscocbQosMIBGroups 58}cbQosPoliceColorStatsGroup OBJECT-GROUPOBJECTS{
cbQosPoliceCfmColorCfmPkt64,
cbQosPoliceCfmColorCfmByte64,
cbQosPoliceCfmColorExdPkt64,
cbQosPoliceCfmColorExdByte64,
cbQosPoliceCfmColorVltPkt64,
cbQosPoliceCfmColorVltByte64,
cbQosPoliceExdColorExdPkt64,
cbQosPoliceExdColorExdByte64,
cbQosPoliceExdColorVltPkt64,
cbQosPoliceExdColorVltByte64,
cbQosPoliceVltColorVltPkt64,
cbQosPoliceVltColorVltByte64
}STATUScurrentDESCRIPTION"Optional objects to provide CB QoS Assured Forwarding
Policing Color Aware statistical information."::={ ciscocbQosMIBGroups 59}cbQosTableMapCfgGroup OBJECT-GROUPOBJECTS{
cbQosTableMapCfgName,
cbQosTableMapCfgBehavior,
cbQosTableMapCfgDftValue,
cbQosTableMapValueCfgTo,
cbQosTMSetIpDscpFromType,
cbQosTMSetIpDscpMapName,
cbQosTMSetIpPrecedenceFromType,
cbQosTMSetIpPrecedenceMapName,
cbQosTMSetQosGroupFromType,
cbQosTMSetQosGroupMapName,
cbQosTMSetL2CosFromType,
cbQosTMSetL2CosMapName,
cbQosTMSetMplsExpImpFromType,
cbQosTMSetMplsExpImpMapName,
cbQosTMSetMplsExpTopFromType,
cbQosTMSetMplsExpTopMapName
}STATUScurrentDESCRIPTION"Optional objects to provide CB QoS Enhanced Packet
Marking configuration information."::={ ciscocbQosMIBGroups 60}cbQosEBCfgGroup OBJECT-GROUPOBJECTS{
cbQosEBCfgMechanism,
cbQosEBCfgDropTarget,
cbQosEBCfgDelayTarget,
cbQosEBCfgDelayThreshold
}STATUScurrentDESCRIPTION"Optional objects to provide Estimate Bandwidth
configuration information."::={ ciscocbQosMIBGroups 61}cbQosEBStatsGroup OBJECT-GROUPOBJECTS{
cbQosEBStatsCorvilEBValue,
cbQosEBStatsCorvilEBStatus,
cbQosEBStatsCorvilCTD
}STATUScurrentDESCRIPTION"Optional objects to provide Estimate Bandwidth
status information."::={ ciscocbQosMIBGroups 62}cbQosServicePolicyExtGroup OBJECT-GROUPOBJECTS{ cbQosVlanIndex }STATUScurrentDESCRIPTION"Optional objects to provide more information about a
particular service policy instance."::={ ciscocbQosMIBGroups 63}cbQosMeasureIPSLACfgGroup OBJECT-GROUPOBJECTS{
cbQosMeasureIPSLACfgGroupIndex,
cbQosMeasureIPSLACfgGroupName
}STATUScurrentDESCRIPTION"Optional objects to configure IPSLA measure action."::={ ciscocbQosMIBGroups 64}cbQosTSCfgExtGroup OBJECT-GROUPOBJECTS{ cbQosTSCfgRate64 }STATUScurrentDESCRIPTION"Objects to provide the information of the
committed shaping rate that is greater than the
maximum value reportable by cbQosTSCfgRate."::={ ciscocbQosMIBGroups 65}END